Finned Tubular Heater, 200 W, 230 V ac
- RS庫存編號:
- 374-2296
- 製造零件編號:
- RA 2652 200
- 製造商:
- Acim Jouanin
- RS庫存編號:
- 374-2296
- 製造零件編號:
- RA 2652 200
- 製造商:
- Acim Jouanin
法例與合規
- COO (Country of Origin):
- FR
產品詳細資訊
RA Series Blade Resistor Heaters
Rectangular finned resistors on stainless steel shielded tube.
Designed to heat air or gas by natural or forced convection.
Used in heater fans and static batteries, dryers and drying tunnels.
Minimum recommended air speed is 2.5m / s.
Designed to heat air or gas by natural or forced convection.
Used in heater fans and static batteries, dryers and drying tunnels.
Minimum recommended air speed is 2.5m / s.
ACIM Jouanin Strip Heater
The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C.
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Features and Benefits
Minimum recommended airspeed is 2.5m/s
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC
Strip Heating Elements
Note
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them
Warning
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Approvals
UL Recognised; CSA Certified
規格
Attribute | Value |
|---|---|
| Element Type | Air Heater |
| Power Rating | 200 W |
| Supply Voltage | 230 V ac |
| Heating Element Form | Tubular |
| Peak Temperature | +200°C |