XinaBox USB (Type A) Power Supply Power Supply

xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.

xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.

xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.

Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs

xChips connect to each other using an xBus connector, available from RS 174-4977.

Some xChips need an xPDI connector (RS 174-4974) to connect to programming interfaces, such as the IP02 or IP03.

This xCHIP is designed to supply power to connected xCHIPS directly from a USB port without the need of an extension cable. Voltage regulation from USB power provided by on-board AP2114 LDO, which features 1 A continuous current output, good output regulation accuracy and short circuit protection.

● 1 A continuous output current
● LED power indicator
● USB A connectivity without the need of a cable

● Provides system power

● Output voltage accuracy: ±1.5%
● Output current: 1A
● Fold-back short current protection: 50 mA
● Low quiescent current: 60 μA
● Low output noise: 30 μV RMS
● OTSD protection
● Operating temperature range: -40ºC to 85ºC

Xinabox Modular Prototyping Boards