Spur Gears

The most common type of gears are spur gears, also known as straight-cut gears, and can be found in a multitude of applications. They have been specifically designed to transmit large amounts of power by placing them on parallel shafts which rotate in opposite directions.
Spur gears have an involute profile with straight teeth which project radially and are parallel to the rotation of the axis. This allows for a smoother operation between each gear and permits greater mounting distances. Spur gears can have a central hub or be hubless.
The standard pressure angles in spur gears are 14.5, 20 and 25 degrees, and refer to the angle that force is transmitted between the meshing gears.
Spur gears are capable of meshing with other gears, with many gears being used to create large gear reductions. When they are meshed the gear with the most teeth is referred to as the “gear”, whereas the one with smaller teeth is referred to as the “pinion”.
So what are the advantages?
• High transmission efficiency
• Compact and very easy to install
• Constant velocity ratio
• No slippage – unlike belt drives
• Highly reliable
• Can transmit large amounts of power
Types of spur gears
Plastic spur gears are commonly made from acetal or nylon and have many positive characteristics including being lightweight, non-rusting and quiet. They enable low cost and large production capabilities, and are also able to operate without lubrication. For hygiene reasons, plastic spur gears are an excellent choice for use in industries dealing with food production and medical equipment.
Metal spur gears have more strength, load-carrying capacity and heat resilience than their plastic counterpart. They are more dimensionally stable compared to plastic and can be made from many metals such as aluminium, brass and stainless steel.
Common applications
• Metal cutting machines
• Power plants
• Marine engines
• Mechanical clocks and watches
• Fuel pumps
• Washing machines
• Gear motors and gear pumps
• Rack and pinion mechanisms
• Material handling equipment
• Automobile gear boxes
• Steel mills
• Rolling mills
Spur gears are however very loud and so will not be found in vehicles. When the teeth collide with each other there is an impact noise which is really loud compared to the helical gears found in cars.

...
顯示內容 隱藏內容

篩選條件

正在檢視 301 - 313,共 313 項產品
Results per page
Description Price Module Number of Teeth Material Bore Diameter Hub Diameter Pitch Diameter Face Width
全新
RS庫存編號 182-7951
BrandRS PRO
HK$191.19
單位
2 28 - 10mm 24mm 56mm 15mm
全新
RS庫存編號 182-7801
BrandRS PRO
HK$57.94
單位
1 12 Steel 5mm 9mm 12mm 15mm
全新
RS庫存編號 182-7837
BrandRS PRO
HK$142.43
單位
1.5 24 Steel 10mm 25mm 36mm 17mm
全新
RS庫存編號 182-7948
BrandRS PRO
HK$146.77
單位
2 20 - 10mm 20mm 40mm 15mm
RS庫存編號 521-7405
BrandRS PRO
HK$38.88
單位
0.8 60 POM 6mm 14.5mm 48mm 4mm
RS庫存編號 521-7477
BrandRS PRO
HK$25.04
單位
1 15 POM 4mm 8mm 15mm 6mm
全新
RS庫存編號 182-7904
BrandRS PRO
HK$23.175
/個 (每包:4個)
單位
0.7 24 - 4mm 9mm 16.8mm 6mm
全新
RS庫存編號 182-7865
BrandRS PRO
HK$101.39
單位
0.7 20 Steel 4mm 10mm 14mm 5mm
全新
RS庫存編號 182-7813
BrandRS PRO
HK$106.22
單位
1 26 Steel 8mm 20mm 26mm 15mm
RS庫存編號 521-7398
BrandRS PRO
HK$28.77
單位
0.8 56 POM 6mm 14.5mm 44.8mm 4mm
全新
RS庫存編號 182-7852
BrandRS PRO
HK$675.44
單位
1.5 80 Steel 15mm 60mm 120mm 17mm
RS庫存編號 521-7629
BrandRS PRO
HK$73.12
單位
1 50 POM 8mm 16mm 50mm 6mm
全新
RS庫存編號 182-7833
BrandRS PRO
HK$106.22
單位
1.5 18 Steel 8mm 20mm 27mm 17mm