Chauvin Arnoux K1 Clamp Meter, 4.5A dc, Max Current 3A ac CAT II 300 V
- RS庫存編號:
- 216-6679
- 製造零件編號:
- P01120067A
- 製造商:
- Chauvin Arnoux
此產品已停售
- RS庫存編號:
- 216-6679
- 製造零件編號:
- P01120067A
- 製造商:
- Chauvin Arnoux
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- FR
產品詳細資訊
K1 and K2 low-current probes
Current probes to measure low DC and AC currents.
Easily adapted to all 19 mm standard spacing multimeters.
Zero reset using a thumb wheel with disable feature.
2 LEDs display overload (red LED) and the correct battery level (green LED).
Applications: loop measurements 4 → 20 mA without opening the circuit, low current measurements, default current measurements etc.
Easily adapted to all 19 mm standard spacing multimeters.
Zero reset using a thumb wheel with disable feature.
2 LEDs display overload (red LED) and the correct battery level (green LED).
Applications: loop measurements 4 → 20 mA without opening the circuit, low current measurements, default current measurements etc.
Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category.
規格
Attribute | Value |
|---|---|
| Absolute Maximum AC Current Measurement | 3A ac |
| Absolute Maximum DC Current Measurement | 4.5A dc |
| Model Number | K1 |
| AC Current Measurement Resolution | 100µA ac |
| DC Current Measurement Resolution | 50µA dc |
| Best DC Current Accuracy | ±1 % |
| Clamp Meter Type | AC-DC Current Probe |
| Best AC Current Accuracy | ±1 % |
| Jaw Capacity Busbars | 3.9mm |
| Functions Measured | AC Current, DC Current |
| Power Source | Battery |
| Safety Category Level | CAT II |
| Weight | 250g |
| Width | 64mm |
| Length | 124mm |
| DC Current Measurement Range | 1 mA dc → 4 A dc |
| Dimensions | 124 x 64 x 28mm |
| Minimum Operating Temperature | -10°C |
| Height | 28mm |
| Battery Life | 20 h |
| Maximum Conductor Size | 3.9mm |
| AC Current Measurement Range | 1 mA ac → 3 A ac |
| Safety Category | CAT II 300 V |
| Battery Type | 9V |
| Maximum Operating Temperature | +55°C |
| Safety Category Voltage | 300V |