- RS庫存編號:
- 743-4964
- 製造零件編號:
- 109797 DILMP32-10(230V50HZ,240V60HZ)
- 製造商:
- Eaton
- RS庫存編號:
- 743-4964
- 製造零件編號:
- 109797 DILMP32-10(230V50HZ,240V60HZ)
- 製造商:
- Eaton
法例與合規
產品詳細資訊
DILM Contactors, Single Phase
X Start is the latest generation of Contactors from Moeller, based on the tried and tested DIL series. This generation of modular Contactors benefit from the advances in technology for motor switching and control, which in turn gives the user a number of additional benefits.
Durable and able to handle all demands
Features immunity to interference and control circuit reliabililty even when used in conjumction with PLC's
Four normally-open main contacts
Features immunity to interference and control circuit reliabililty even when used in conjumction with PLC's
Four normally-open main contacts
DILM 580 A - 1400 A Contactors
These power contactors use vacuum technology which enables them to stay compact in size. The technology prevents the formation of open arcs and therefore the release of any switching gases allowing a tighter arrangement of the switchgear and smaller distances to the conductive structures.
Features and Benefits
Compatible with the SmartWire-DT® communication system
Identical sizes for AC and DC operated contactors
Minimised heat dissipation - energy saving
Direct Fieldbus connection
Integrated suppressor circuit for DC models
Suitable for up to 1,000 V
AC/DC wide-range coil
Low holding power
Utilisation category AC 1 and AC 3
Features immunity to interference and control circuit reliability even when used in conjunction with PLC's
Identical sizes for AC and DC operated contactors
Minimised heat dissipation - energy saving
Direct Fieldbus connection
Integrated suppressor circuit for DC models
Suitable for up to 1,000 V
AC/DC wide-range coil
Low holding power
Utilisation category AC 1 and AC 3
Features immunity to interference and control circuit reliability even when used in conjunction with PLC's
Typical Applications
This range of contactors can be used across a multitude of applications, users will commonly find these contactors being used within industrial settings such as factory automation, railway transportation, electrical systems, electric motor, lighting, and mechanical engineering.
How contactors operate?
Contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, a contactor is a switch that can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts. If a device has the ability to switch more than 15 amperes it is called a contactor. These devices also feature high coil voltages which is rare within relays.
Standards
IEC/EN 60947, VDE 0660, UL, CSA
DILMP32-10(230V50HZ,240V60HZ) Single Phase Contactor
4 Pole contactor
Contactors up to 200 A
Screw terminals
AC operation
Coil Voltage 230 V ac
Power Rating 7.5 kW
IP00 Protection against direct contact when actuated from front (EN 90274) Finger- and back-of-hand proof
Contactors up to 200 A
Screw terminals
AC operation
Coil Voltage 230 V ac
Power Rating 7.5 kW
IP00 Protection against direct contact when actuated from front (EN 90274) Finger- and back-of-hand proof
Note
Eaton formerly known as Moeller
規格
Attribute | Value |
---|---|
Coil Voltage | 230 V ac |
Number of Poles | 4 |
Contact Voltage Rating | 400 V ac |
Contact Current Rating | 32 A |
Range | xStart |
Power Rating | 7.5 kW |
Series | Eaton Moeller |
Normal State Configuration | 4NO |
Number Of Auxiliary Contacts | 1 |
Terminal Type | Screw |
Length | 85mm |
Width | 58mm |
Depth | 138mm |
Maximum Operating Temperature | +60°C |
Minimum Operating Temperature | -25°C |
Pole and Throw Configuration | 4P |