ABB AF Series Contactor, 24 V ac/dc Coil, 3-Pole, 200 A, 75 kW, 3NO, 690 V ac
- RS庫存編號:
- 800-7245
- 製造零件編號:
- 1SFL447001R1111 AF140-30-11-11
- 製造商:
- ABB
- RS庫存編號:
- 800-7245
- 製造零件編號:
- 1SFL447001R1111 AF140-30-11-11
- 製造商:
- ABB
法例與合規
豁免
- COO (Country of Origin):
- SE
產品詳細資訊
AF Range Contactors, 3 Pole
AF contactors are AC/DC operated
AF09-AF38 contactors include an electronic coil interface accepting a wide control voltage Ucmin - Ucmax. Only four coils cover control voltages 24 → 500 Vac or 20 → 500 Vdc
AF..Z contactors equipped with a Z coil type allow direct control by 24 Vdc, 500 mA PLC output and obtain a reduced holding coil consumption
AF.Z contactors withstand short dips and voltage interruptions (SEMI F47-0706 compliance)
AF40-AF96 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC, these contactors are of the block type design with 3 main poles.
AF116-AF140 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC
AF190-AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC, these contactors are of the block type design with 3 main poles.
AF contactors have built in surge protection and does not require any additional surge suppressors
AF09-AF38 contactors include an electronic coil interface accepting a wide control voltage Ucmin - Ucmax. Only four coils cover control voltages 24 → 500 Vac or 20 → 500 Vdc
AF..Z contactors equipped with a Z coil type allow direct control by 24 Vdc, 500 mA PLC output and obtain a reduced holding coil consumption
AF.Z contactors withstand short dips and voltage interruptions (SEMI F47-0706 compliance)
AF40-AF96 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC, these contactors are of the block type design with 3 main poles.
AF116-AF140 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC
AF190-AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC, these contactors are of the block type design with 3 main poles.
AF contactors have built in surge protection and does not require any additional surge suppressors
Standards
IEC 60947-1 / 60947-4-7 and EN 60947-1 / 60947-4-1
規格
Attribute | Value |
|---|---|
| Coil Voltage | 24 V ac/dc |
| Number of Poles | 3 |
| Contact Voltage Rating | 690 V ac |
| Contact Current Rating | 200 A |
| Range | AF140-30-11-11 |
| Series | AF |
| Power Rating | 75 kW |
| Normal State Configuration | 3NO |
| Number Of Auxiliary Contacts | 2 |
| Terminal Type | Screw |
| Width | 150mm |
| Length | 90mm |
| Depth | 126mm |
| Maximum Operating Temperature | +70°C |
| Minimum Operating Temperature | -40°C |
| Pole and Throw Configuration | 3P |