RS PRO French Colour Coded Bootlace Ferrule Crimp terminal Kit

  • RS庫存編號 228-0321
  • 製造商 RS PRO
COO (Country of Origin): TW

RS Pro French Colour Code Multi Compartment Kits

RS Pro presents two handy crimp terminal kits of an assortment of our popular insulated bootlace ferrules covering the sizes of 0·5 mm² through to 10 mm². The kits will ensure you are equipped when it comes to terminating conductors for electrical connections. The ferrules are French colour coded and kits contain the stock numbers shown in table below.
Kit 1 contains ferrules only (228-0321)
Kit 2 contains ferrules and a plier crimp tool for crimping sizes 0.75 to 10 mm2 (266-0288)

Features and Benefits

• Portable, compact and uncluttered storage in minimum space
• Both kits contain 8 Ferrule compartments
• Plastic see-through cover
• Marked compartments, sorted by size and ease of selection

Why should you use ferrules?

• Ferrules are the preferred alternative to twisting wire strands or tinning wire extremities prior to termination.
• It minimises the possibility of an unreliable connection
• Prevents conductor breakage due to bending, wire stress or vibration"

A bootlace ferrule is a metal tube or ferrule with a moulded colour coded insulating collar made from plastic. The ferrule is slipped over the end of a multi-stranded wire or cable, crimped and then inserted into a screw or spring clamp connection.

Application information

• Automotive and transportation industry
• Building automation
• Renewable energy
• OEM’S (panel fabrication)
• Home DIY purposes"

When the end of a multi-stranded wire is stripped and placed directly under a screw terminal the strands of the wire will naturally fan out under the pressure of the screw. Some strands will go astray. This reduces the quality of the electrical connection and can also result in electrical shorts. When a bootlace ferrule is used, the insulated funnel with it's flared design captures all the strands. These strands are then crimped together in the ferrule tube. The crimped ferrule is then inserted into the terminal to create an electrical connection

Features and Benefits

• French colour coded insulation for easy ferrule size identification
• Excellent electrical connection
• Crimped terminal can be repeatedly inserted and removed from the connection without degrading end of the wire
• Portable, compact and uncluttered storage
• 8 marked compartments sorted by size for ease of selection
• Plastic transparent cover

Application information

Bootlace ferrules are used on multi-stranded wires that are being inserted into screw terminals and terminal blocks. Applications include consumer units, circuit breakers, electrical control panels and any equipment where there is a requirement for a multi-stranded wire connection.

Questions and Answers

How to Crimp a Bootlace Ferrule

Select the correct size bootlace ferrule and strip the end of the wire. Cut the wires to the same length as terminal and twist the strands together. Slip the bootlace ferrule (insulated collar first) onto the ends of the wire until the wire strands are flush with the end of the tube. Using a ratchet crimping tool or ferrule crimper, insert the metal tube of the ferrule into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed preventing partial crimps. The crimped wire end is now ready to be inserted into connecting terminal

Suitable Crimping Tools

Suitable crimp tool for 0.25 to 6 mm2 see stock number 683-1605
Suitable crimp tool for 0.5 to 16 mm2 see stock number 464-482
Suitable crimp tool for 10 to 25 mm2 see stock number 683-1614

Attribute Value
Type French Colour Coded
Connector Type Bootlace Ferrule
Kit Contents 0.5mm² → 10mm² Wire End Ferrules
949 現貨庫存,可於3工作日發貨。
單價 個
HK$ 258.79
Per unit
1 +