- RS庫存編號:
- 305-324
- 製造零件編號:
- 97 54 24
- 製造商:
- Knipex
- RS庫存編號:
- 305-324
- 製造零件編號:
- 97 54 24
- 製造商:
- Knipex
產品概覽和技術數據資料表
法例與合規
- COO (Country of Origin):
- DE
產品詳細資訊
Micro-connector crimping pliers with parallel crimping
Features and benefits
- Parallel crimping motion, to meet the particularly stringent requirements of micro-connectors
- Amplified force due to toggle gearing for less tiring work
- High-quality repeat crimping thanks to the integrated lock (automatic release mechanism)
- Crimping pressure precisely defined (calibrated) at the factory, also adjustable
- Optimum force transmission through lever for fatigue-reducing operation
- Low weight
- Compact design
- Ergonomic handles
- Capacities mm² / AWG : for D-Sub; HD 20; HDE micro connectors - Connectors from 0.03 to 0.56 mm² - AWG 32 to 20
- Material: Special grade chrome vanadium electrical steel, oil quenched
- Amplified force due to toggle gearing for less tiring work
- High-quality repeat crimping thanks to the integrated lock (automatic release mechanism)
- Crimping pressure precisely defined (calibrated) at the factory, also adjustable
- Optimum force transmission through lever for fatigue-reducing operation
- Low weight
- Compact design
- Ergonomic handles
- Capacities mm² / AWG : for D-Sub; HD 20; HDE micro connectors - Connectors from 0.03 to 0.56 mm² - AWG 32 to 20
- Material: Special grade chrome vanadium electrical steel, oil quenched
Typical applications
Crimping pliers can be used in many applications:
- Maintenance and repair
- Electrical installations
- Crimp shop
- Maintenance and repair
- Electrical installations
- Crimp shop
Product Maintenance
- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
規格
Attribute | Value |
---|---|
Product Type | Crimp Tool |
Operation | Hand |
For Use With | D Sub HD 20 Contacts, D Sub HDE Contacts |
Wire Size mm² | 0.03 → 0.56mm² |
Wire Size AWG | 32 → 20AWG |
Ratcheting | Yes |
Overall Length | 190 mm |