Keysight Technologies N2893A Current Probe & Clamp
- RS庫存編號 733-6154
- 製造零件編號 N2893A
- 製造商 Keysight Technologies
Keysight N2893A AC/DC Current Probe
Wide bandwidth current probe offering flat frequency response across its entire dc to 100MHz bandwidth, low noise (< -2.5mArms) and low circuit insertion loss. The N2893A uniquely provides auto demagnetization and offset elimination features when used in conjunction with InfiniiVision or Infiniium oscilloscopes.
Hybrid technology to measure ac and dc
Compatible with 1MΩ oscilloscope input
DC supply voltage requirement of±12Vdc ±1V
Probe power consumption increases with measured current (e.g. 3VA when measuring 15A)
Maximum continuous current 15A
Maximum peak current 50A
Keysight Technologies Current Probe & Clamp
The Keysight Technologies 100MHz bandwidth, active current probe for InfiniiVision and Infiniium oscilloscopes. The probe features flat bandwidth (DC-100MHz), low noise (<2.5 mA RMS) and low circuit insertion loss. Auto demagnetization (degauss) and calibration removes any residual magnetism and unwanted DC offset in the probe. The probe is directly powered by the InfiniiVision and Infiniium Autoprobe interface, eliminating the need for an additional power supply. It is ideal for capturing transient current signals such as those found in motor controllers, switching power supplies, inverters, and current amplifiers driving inductive loads.
Features and Benefits
• Wide bandwidth from DC to 100MHz
• High S/N ratio
• Low current measurement capability
• 15A peak, 15ADC, 10Arms continuous, 30A peak non-continuous current
• Easy protect function at excessive input
Applications
• For use with 80000/90000 series
• Use N278xA current probe with N2779A power supply
• E2697A high impedance adapter
• For use with 90000 X-series
• Use the N5449A high impedance probe adapter
Certifications
• CAT I 300V
• CAT I
| Attribute | Value |
|---|---|
| Current | 15A |
| Probe Type | AC/DC |
| Minimum Bandwidth | 0Hz |
| Maximum Bandwidth | 100000kHz |
| Safety Category | CAT I 300 V |
| Safety Category Level | CAT I |
| Model Number p | N2893A |
| Best Accuracy | ±1% + 1 mV |
| Safety Category Voltage | 300V |
| Bandwidth | DC to 100 MHz |
