Siemens SIMATIC S7-300 Switched Mode DIN Rail Power Supply, 120 → 230V ac ac Input, 24V dc dc Output, 5A Output,
- RS庫存編號:
- 714-1256
- 製造零件編號:
- 6ES7307-1EA01-0AA0
- 製造商:
- Siemens
22 在3 工作日內發貨 (海外庫存)
25 在4 工作日內發貨 (海外庫存)
已增加
單價 个
HK$3,220.60
| 單位 | Per unit |
| 1 - 4 | HK$3,220.60 |
| 5 + | HK$2,650.50 |
- RS庫存編號:
- 714-1256
- 製造零件編號:
- 6ES7307-1EA01-0AA0
- 製造商:
- Siemens
法例與合規
- COO (Country of Origin):
- RO
產品詳細資訊
S7-300 Power Supply
The design and functionality of the SIMATIC PS 307 single-phase power supply with automatic range switchover of the input voltage is an optimal match to the SIMATIC S7-300 PLC. The supply to the CPU is quickly established by means of the connecting comb that is supplied with the system and load current supply. It is also possible to provide a 24 V supply to other S7-300 system components, input/output circuits of the input/output modules and, if necessary, the sensors and actuators.
Features and Benefits
The system and load current supplies are screwed directly onto the S7-300 standard mounting rail and can be mounted directly to the left of the CPU
Diagnostic LED for indicating “Output voltage 24 V dc O.K."
ON/OFF switches for possible swapping of modules
Strain-relief assembly for input voltage connection cable
Short-term power failure backup
Output voltage 24 V DC, stabilized, short circuit-proof, open circuit-proof
Parallel connection of two power supplies for enhanced performance
Product Application Information
Comprehensive certifications, such as UL, ATEX and GL enable universal use in various industries.
Why use a DIN Rail power supply?
The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.
Points to consider when buying a DIN Rail power supply
DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail.
Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Approvals
CE, cULus, ATEX, cULas Class I Div 2, GL, ABS, DNV
Notes
Each CPU requires a Micro Memory Card (MMC). Programming may be carried out using the Step 7 Lite software (stock no. 539-1755).
Note
Each CPU requires a Micro Memory Card (MMC). Programming may be carried out using the Step 7 Lite software (stock no. 539-1755).
Approvals
CE, cULus, ATEX, cULas Class I Div 2, GL, ABS, DNV
Siemens 6ES7307-1EA01-0AA0 Power Supply, 24 V, 5 A, 120 W
Use this power supply unit (PSU) from Siemens to efficiently power your PLC (programmable logic controller). The device is protected against short circuits thanks to its self-restart capabilities and it will automatically shut down in the event of a power failure. Screw terminals ensure a simple and secure connection. Thanks to its wide operating temperature range of 0°C to +60°C, it's suitable for use in both hot and cold industrial environments. You'll commonly find a PSU like this one used for industrial engineering applications.
• Space-saving dimensions of 125 (height) x 60 (width) x 120mm (depth)
• Light weight of just 600g to minimise strain on your equipment
• Green LED clearly indicates operating status for ease of use
• IP20 (ingress protection) rating means it's touch-proof and protected against objects larger than 12mm in size
• Accommodates parallel connection of two PSUs to enhance performance and efficiency
• Light weight of just 600g to minimise strain on your equipment
• Green LED clearly indicates operating status for ease of use
• IP20 (ingress protection) rating means it's touch-proof and protected against objects larger than 12mm in size
• Accommodates parallel connection of two PSUs to enhance performance and efficiency
How do I mount this PSU?
This PSU is designed to be clipped quickly and easily onto a standard DIN rail.
規格
Attribute | Value |
|---|---|
| Type | Switched Mode |
| Output Voltage | 24V dc |
| Output Current | 5A |
| AC or DC Input Voltage | ac |
| AC or DC Output Voltage | dc |
| Input Voltage | 120 → 230V ac |
| Power Rating | 120W |
| Electrical Phase | 1 |
| Number of Outputs | 1 |
| Height | 125mm |
| Width | 60mm |
| Depth | 125mm |
| Series | SIMATIC S7-300 |
| Maximum Temperature | +60°C |
| Load Regulation | 0.5% |
| Ripple And Noise | 50 mV PK-PK |
| Mounting Type | DIN Rail Mount |
| Minimum Temperature | 0°C |