Sensirion Liquid Flow Switch Flow Meter for Liquid, 250 (Isopropyl Alcohol) Min, 250 (Isopropyl Alcohol) ml/min, 50
- RS庫存編號:
- 898-6731
- 製造零件編號:
- LG01-2000A090
- 製造商:
- Sensirion
此產品已停售
- RS庫存編號:
- 898-6731
- 製造零件編號:
- LG01-2000A090
- 製造商:
- Sensirion
產品概覽和技術數據資料表
法例與合規
- COO (Country of Origin):
- CH
產品詳細資訊
LG01-2000A Liquid Flow Switch & Bubble Detectors
The LG01-2000A family of liquid flow switches from Sensirion are able to detect liquid flow by millilitres per minute (ml/min). It also provides bubble detection.
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensor’s flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches. 200-9558
When the flow rate is more than the desired flow switch point, the output signal is 5 V. If the flow rate is lower than this point the output signal is 0 V. This is also the case for when air/bubbles are sensed within the sensor’s flow channel.
This non-invasive liquid flow switch has a straight glass capillary flow path. This also enables chemical resistance and bio-compatibility.
An additional Connectivity Kit can be purchased separately for the LG01 liquid flow switches. 200-9558
Features of the LG01 Liquid Flow Switches
• Flow switch & bubble detector
• Non-invasive
• Fast response time (100 ms)
• Operating temperature: +10 to +50 °C
• Non-invasive
• Fast response time (100 ms)
• Operating temperature: +10 to +50 °C
規格
Attribute | Value |
|---|---|
| Media Monitored | Liquid |
| Device Type | Liquid Flow Switch |
| Minimum Flow Rate | 250 (Isopropyl Alcohol) |
| Maximum Flow Rate | 250 (Isopropyl Alcohol) ml/min, 50 (Water) ml/min |
| Supply Voltage | 5 → 12 V |
| Pipe Diameter Range | 9.2 mm |
| Connection Type | 5 Pin PCB Header |
| Maximum Pressure | 3bar |
| Material | Borosilicate Glass (Tube Material), FEP (Sealing), PEEk (Fitting) |
| Minimum Operating Temperature | +10°C |
| Maximum Operating Temperature | +50°C |
| Current Rating | 6.8 mA |