RS PRO L Gearbox, 1:1 Gear Ratio, 500rpm Maximum Speed

  • RS庫存編號 420-603
  • 製造商 RS PRO
產品概覽和技術數據資料表
法例與合規
相容
產品詳細資訊

Bevel Gearbox - 1:1 Ratio

The unit has steel bevel gears and shafts running in ball races and sintered bronze bearings, one ball race and one sintered bronze bearing per shaft. The ball races also act as a thrust race protecting the bevel gears from axial pressures of varying loads. The moulded housings are 30% glass reinforced nylon for strength and have four drilled mounting holes. Output shafts are Ø5mm with key flats. Length from heel of body to end of shafts 57.5mm approx.

Lubricated for life
Designed for rugged service
Weight: 42g
Backlash: 1° approx.
Gears: Mild steel to BS970 part 3, 1991, 230MO7

MFA Como Geared Motors

A selection guide for MFA Como Geared Motors available:

Multi-ratio spur geared motors:

Suitable for low torque R&D and education applications
Useful in seeking suitable speeds for applications by selecting the appropriate ratio and/or voltage

Metal single ratio spur geared motors mounted on steel brackets:

Suitable for industrial/modelling applications
Economical and easily accessible

Metal single ratio epicyclic geared motors:

Suitable for industrial/modelling applications
Higher efficiency than spur (can be above 90%)
Smaller size and weight for the same or similar rating
Can be equally efficient in either direction
Co-axial configuration of input and output shafts allows inline installation with motor and machine

規格
Attribute Value
Gear Ratio 1:1
Gearbox Type L
Shaft Diameter 5mm
Overall Length 57.3mm
Overall Width 30mm
Overall Depth 57.3mm
Maximum Speed 500rpm
當前暫無庫存,可於2019/12/4發貨,3 工作日送達。
單價 個
HK$ 222.80
(不含稅)
單位
Per unit
1 +
HK$222.80