1217mm Synthetic Rubber Hydraulic Hose Assembly, 330 bar Max Pressure, -40 → +100°C

  • RS庫存編號 448-6537
  • 製造零件編號 448-6537
  • 製造商 Parker
產品概覽和技術數據資料表
法例與合規
不適用
產品詳細資訊

Straight / 90° Elbow Assembly

High quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fittings (which eliminates an incorrectly matched insert and sleeve) and matching hoses which are assembled together using dedicated crimping machinery and dies. The crimp is affected by the bite of the serrations in the sleeve on to the hose reinforcement. The reinforcing braid is protected by the external rubber cover, which makes the fitting and hose assembly leak tight. This feature guarantees corrosion protection of the reinforcement and so prolongs the life of the assembly. For further confidence every assembly is proof pressure tested to twice working pressure. Applications include medium pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water. Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel wire reinforcing. Fittings are zinc plated mild steel. Manufacturer’s hose type is Parker Type 301 No Skive Hose, with a BSP Straight Swivel Female Each End. Temperature range is -40 to +100°C. All finished assemblies proof pressure tested to twice maximum working pressure. Temperature range -40 to +100°C.

Note

These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi).

Standards

DIN 20022 2SN, EN853-2SN, SAE 100R2 AT

//media.rs-online.com/t_line/L396525-01.gif

Standards

DIN 20022 2SN; EN853-2SN; SAE 100R2 AT; ISO 1307

Warning

  • Flexible hose assemblies are capable of transmitting fluids at high pressures. Careful attention should be given to application, material & technical specifications.
規格
Attribute Value
Overall Length 1217mm
Inside Diameter 3/8in
Connector A Straight G 3/8 Female
Connector B 90° Elbow G 3/8 Female
Inner Hose Material Synthetic Rubber
Reinforcing Material Steel
Cover Material Synthetic Rubber
Maximum Operating Pressure 330 bar
Connector B - Thread Standard G
Connector A - Angle Straight
Connector B - Thread Size 3/8in
Connector A - Thread Standard G
Connector B - Gender Female
Connector A - Gender Female
Maximum Operating Temperature +100°C
Minimum Operating Temperature -40°C
Connector B - Angle 90° Elbow
Connector A - Thread Size 3/8in
2 現貨庫存,可於3工作日發貨。
單價 個
HK$ 310.00
(不含稅)
單位
Per unit
1 - 5
HK$310.00
6 - 11
HK$295.00
12 +
HK$285.00