STMicroelectronics, STLD40DPUR

產品概覽和技術數據資料表
法例與合規
相容
產品詳細資訊

STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSWis fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the LED current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. By applying a low frequency PWM signal the LEDs can be dimmed. The maximum peak inductor current can be programmed by connected a resistor RSETto the pin RSET.

Inductor switches boost controllerPFM mode controlHigh efficiency over wide range of input voltage from 3.0 V to 5.5 VOver voltage protection with automatic restartAdjustable peak current limitEnable pin with possibility of PWM dimming controlLow shutdown current < 1 μASmall external componentGood load and line regulationQFN8 3 x 3 mmApplicationsWhite LED supply for LCD backlightMobile phonePDA and organizersAny handsets powered form 3.0 V to 5.5 V

規格
Attribute Value
Mounting Type Surface Mount
Package Type QFN
Pin Count 8
Typical Operating Supply Voltage 3 5.5 V
Dimensions 3.15 x 3.15 x 0.95mm
Height 0.95mm
Length 3.15mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 3.15mm
Output Voltage 37 V
當前暫無庫存,可於2020/4/17發貨,3 工作日送達。
單價 個 (在毎卷:3000)
HK$ 6.092
(不含稅)
單位
Per unit
Per Reel*
3000 - 6000
HK$6.092
HK$18,276.00
9000 +
HK$5.394
HK$16,182.00
* 參考價格