STMicroelectronics, STLD40DPUR


STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSWis fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the LED current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. By applying a low frequency PWM signal the LEDs can be dimmed. The maximum peak inductor current can be programmed by connected a resistor RSETto the pin RSET.

Inductor switches boost controller
PFM mode control
High efficiency over wide range of input voltage from 3.0 V to 5.5 V
Over voltage protection with automatic restart
Adjustable peak current limit
Enable pin with possibility of PWM dimming control
Low shutdown current < 1 μA
Small external component
Good load and line regulation
QFN8 3 x 3 mm
White LED supply for LCD backlight
Mobile phone
PDA and organizers
Any handsets powered form 3.0 V to 5.5 V

Attribute Value
Mounting Type Surface Mount
Package Type QFN
Pin Count 8
Typical Operating Supply Voltage 3 → 5.5 V
Dimensions 3.15 x 3.15 x 0.95mm
Height 0.95mm
Length 3.15mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 3.15mm
Output Voltage 37 V
3000 現貨庫存,可於3工作日發貨。
單價 個
HK$ 114.79
Per unit
1 - 4
5 - 9
10 - 24
25 - 99
100 +