Rosemount Rosemount 3100 Series Top Mount Ultrasonic Level Sensor Relay Output ATEX

  • RS庫存編號 892-9754
  • 製造零件編號 3105HP3FSCI1
  • 製造商 Rosemount
產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): GB
產品詳細資訊

Rosemount 3105 Ultrasonic Level Transmitter

The Rosemount 3105 uses ultrasonic technology to continuously measure liquid levels in a variety of industrial and water applications including storage tanks, effluent pits, reservoirs, and filter bed levels.

Measures liquid level from 0.3 to 11 metres
Volume or open channel flow can be calculated.
Glass-filled nylon housing with PVDF wet-side
2” BSPT threaded process connection
M20 x 1.5 conduit entries (2 off) for cable glands
2-wire 24V direct current loop-powered (external power supply is required)
4-20mA and digital HART outputs
Integral push-buttons for menu system navigation and application set-up
Integral LCD display of metric/imperial measurements and for menu system
Low cost of installation/commissioning and minimal maintenance cost
Intrinsically safe approvals for hazardous (safe) area installation

Features and Benefits

• Eliminates problems experienced with contacting instrumentation
• Simple set-up and operation with an integral LCD display and buttons
• Low cost of installation and commissioning.
• Minimal maintenance after installed
• Process downtime minimized
• Non-contacting measurement with no moving parts
• Two integral signal relays (on the Rosemount 3102 only)
• Corrosion resistant PVDF wetted material
• Two-wire 24 V direct current loop-powered
• Operating range up to 36 ft. (11 m)
• Automatic temperature compensation

Application Examples

• Storage tank levels
• Open channel flow
• Effluent pits
• Reservoir level
• Buffer tanks

Note

The 3101/3102/3105 Ultrasonic Level transmitters should not be mounted directly to metal.
It is highly recommended to use Rosemount mounting flanges.

Rosemount Ultrasonic Level Transmitter

The Rosemount ultrasonic liquid level transmitter has a 36ft (11m) range. The ultrasonic pulse signals are transmitted and reflected from the liquid surface. The transmitter ’listens’ for reflected signals (echoes) and measures the time delay between transmitting and receiving. The distance to the liquid surface is automatically calculated using the computed time delay. The transmitter then calculates the liquid depth (level) and outputs the level ranging between 4mA and 20mA signal with HART communication.

Note:
The 3101/3102/3105 ultrasonic level transmitters should not be mounted directly to metal.
It is highly recommended to use Rosemount mounting flanges.

Features and Benefits

• Housing material is made of glass filled nylon
• Conduit/Cable thread of M20 x 1.5 supplied with nylon cable glands (Plastic housing only)
• Process connection of 2in BSPT thread

Measures liquid height, distance to liquid, volume or flow in open channels
• Eliminates problems experienced with contacting instrumentation
• Simple set-up and operation with an integral LCD display and buttons
• Low cost of installation and commissioning
• Minimal maintenance after installed
• Process downtime minimized
• Non-contacting measurement with no moving parts
• Two integral signal relays (on the Rosemount 3102 only)
• Corrosion-resistant PVDF wetted material
• Two-wire, 24V direct current loop-powered
• Automatic temperature compensation

Applications


Storage tank levels
• Open channel flow
• Effluent pits
• Reservoir level
• Buffer tanks
• Industrial and water applications

規格
Attribute Value
Device Type Level Transmitter
Mounting Type Top Mount
Switch Output Relay
Body Material Glass Filled Nylon
Minimum Operating Temperature -30°C
Maximum Operating Temperature +70°C
Maximum DC Voltage 30 (Hazardous area) V, 40 (Non-Hazardous area) V
Maximum Current 21.75 mA
Maximum Pressure 3bar
Hazardous Area Certification ATEX
Series Rosemount 3100
4 現貨庫存,可於3工作日發貨。
單價 個
HK$ 8,724.89
(不含稅)
單位
Per unit
1 +
HK$8,724.89