- RS庫存編號:
- 186-8834
- 製造零件編號:
- MC100EPT26DTG
- 製造商:
- onsemi
當前暫無庫存,可於2024/11/4發貨,3 工作日送達。
已增加
單價 毎管:100 个
HK$60.496
單位 | Per unit | Per Tube* |
100 - 100 | HK$60.496 | HK$6,049.60 |
200 - 300 | HK$59.181 | HK$5,918.10 |
400 + | HK$57.866 | HK$5,786.60 |
* 參考價格 |
- RS庫存編號:
- 186-8834
- 製造零件編號:
- MC100EPT26DTG
- 製造商:
- onsemi
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
The MC100EPT26 is a 1:2 Fanout Differential LVPECL to LVTTL translator. Because LVPECL (Positive ECL) levels are used only +3.3V and ground are required. The small outline 8-lead SOIC package and the 1:2 fanout design of the EPT26 makes it ideal for applications which require the low skew duplication of a signal in a tightly packed PC board. The VBB output allows the EPT26 to be used in a single-ended input mode. In this mode the VBB output is tied to the D0bar input for a non-inverting buffer or the D0 input for an inverting buffer. If used, the VBB pin should be bypassed to ground via a 0.01 uF capacitor.
1.4ns Typical Propagation Delay
Maximum Frequency > 275 MHz Typical
The 100 Series Contains Temperature Compensation
Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V
Open Input Default State
Safety Clamp on Inputs
24mA TTL outputs
Q Outputs will default LOW with inputs open or at VEE VBB Output
Maximum Frequency > 275 MHz Typical
The 100 Series Contains Temperature Compensation
Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V
Open Input Default State
Safety Clamp on Inputs
24mA TTL outputs
Q Outputs will default LOW with inputs open or at VEE VBB Output
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
LVDS Communication
Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables.
Applications: Firewire, SATA, SCSI
規格
Attribute | Value |
---|---|
Mounting Type | Surface Mount |
Package Type | TSSOP |
Output Type | TTL |
Pin Count | 8 |
Dimensions | 3.1 x 3.1 x 1.95mm |
Logic Function | Translator |
Maximum Low Level Output Current | 24mA |
Maximum High Level Output Current | -3mA |
Propagation Delay Test Condition | 20pF |
Maximum Propagation Delay Time @ Maximum CL | 4.1 ns @ 20 pF |
Maximum Operating Supply Voltage | 3.6 V |
Maximum Operating Temperature | +85 °C |
Minimum Operating Supply Voltage | 3.6 V |
Minimum Operating Temperature | -40 °C |