Mechanical Counter Elesa CE.82233-rb, Revolution 5 digits Top Coming

  • RS庫存編號 382-6574
  • 製造零件編號 CE.82233-rb
  • 製造商 Elesa
產品概覽和技術數據資料表
法例與合規
不相容
COO (Country of Origin): IT
產品詳細資訊

Mechanical Position Indicator

Mechanical devices for reading settings and outputs on machinery and equipment requiring adjustment by means of rotating shafts or lead screws.

Operating use:

To give an exact reading of distance moved by relating the reading of the indicator to the thread pitch of the shaft or lead screw (type dependant on pitch - see table).
To count the number of turns of a shaft (types 001.00 or 0001.0), allowing an operator to set a specific setting to perform a given function.

Fitting Instructions:

Drill 6mm by 10mm deep hole 22mm from centre of shaft to accept rear locating pin
Zero set shaft and indicator reading
Locate on shaft and tighten grub screw

Five digit counter with magnified lens
Clockwise shaft rotation
Impact resistant thermoplastic case
Ultrasonically welded to prevent tampering and dirt ingression
Rear brass bushing with double sealing to IP67
DD52R comprises of 37mm deep indicator and 14mm spacer

//media.rs-online.com/t_line/L382651-01.gif
//media.rs-online.com/t_line/L3826518-02.gif

Elesa Digital Mechanical Position Indicator

The Elesa DD52R series mechanical resolution counter is a 5-digit direct drive, digital position indicator. It has clockwise shaft rotation with a maximum shaft speed of 625rpm. It is the black case, high-resistance, polyamide based (PA) technopolymer. It can be used for reading settings and outputs on machinery, as well as equipment requiring adjustment with the help of rotating shafts or lead screws.

Operating use:
To give an exact reading of distance moved by relating the reading of the indicator to the thread pitch of the shaft or lead screw (type dependant on the pitch -see table)
To count the number of turns of a shaft (types 001.00 or 0001.0) for an operator to set a specific setting to perform a given function
Fitting Instructions:
Drill 6mm by 10mm deep hole 22mm from the centre of the shaft to accept rear locating pin
Zero set shaft and indicator reading
Locate on the shaft and tighten the grub screw

Features and Benefits


Pitch is 4.0
• Display after 1 rev is 0004.0
• Impact resistant thermoplastic case
• Ultrasonically welded to prevent tampering and dirt ingression
• Rear brass bushing with double sealing
• Drive shaft diameter is 14mm

Applications


Material handling equipment
• Rapid transit vehicles
• Street sweepers
• Farm machinery
• Carts for recreational use

Certifications


IP67 rated

規格
Attribute Value
Motion Revolution
Number of Digits 5
Direction Of Rotation Top Coming
Shaft Speed Maximum 625rpm
Drive Shaft Diameter 20mm
18 現貨庫存,可於3工作日發貨。
單價 個
HK$ 620.16
(不含稅)
單位
Per unit
1 +
HK$620.16