Fluke Test Probe, 40kV

Brought to you by Fluke, a range of high voltage probes suitable for use with Fluke multimeters. These probes, mounted on a high-quality lead, can measure voltages from 6000 V up to 40,000 V, dependent on the model. All models are highly reliable and excellent quality.

• Insulated lead attached to each probe
• Excellent quality test probes
• Banana plug connector
• CAT I safety category

Two high voltage probes that can measure multimeter voltages up to 6000 V or 40,000 V.

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.

Only suitable for low energy applications

Get the inside scoop on your electrical circuits with this test probe from FLUKE. It's designed to work with your AC/DC voltmeter and extend its measuring capacity up to 6kV, making it suitable for use in energy-limited circuits. The unit is constructed with your safety in mind, as it has a plastic cover that provides a barrier between you and the signals being assessed, preventing electric shock. Easily link up the probe to your test equipment with its banana plug fitting.

• Safe for use in challenging conditions thanks to an operating temperature range between 0°C and +50°C
• Accuracy of ±1% at frequencies below 500Hz for precise measurement
• Light weight of 12.7g makes it easy to handle during operation
• Performs reliably in RH up to 80%, so it's suitable for use in humid settings

• Consumer electronics
• Medical equipment
• HVAC systems
• Automotive wiring

To be sure of precise measurements with this tool, you must check that the frequency is not above 1kHz. Output reading fails on this unit above that threshold.