Cinch Connectors Network Cable Tester Cable Tester BNC, RJ11, RJ45

產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): TW
產品詳細資訊

Cinch Connectors LAN & Modular Cable Tester

Designed to quickly read the correct pin configuration of Cat 5/5E/6, Coax, RJ45/RJ11 modular cables, 356A, EIA/TIA-568A/B and token ring cables. Able to test cables up to 1,000 feet away through wall plates and patch panels using the remote terminator. Featuring pin-out LED indicators it can also auto or manual scan.
Verification for continuity, opens, shorts, reversed pairs and cable ground.

Features and Benefits:

• Robust and simple design
• Power switch for conserving battery
• Tester and terminator

Frequently asked questions:

What is a LAN cable tester?

LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.

How do network cable testers work?

Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems.

What is the difference between RJ45 & RJ11?

RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.

Supplied with

2 x BNC adapter cables (15cm), 1 x BNC adapter (M) to (M), 6" RJ-45 modular cable and a deluxe carrying bag.

Cinch Connectors Network cable tester

The Cinch Connectors network cable tester is designed to quickly read the correct pin configuration of Cat 5/5E/6, Coax, RJ45/RJ11 modular cables, 356A, EIA/TIA-568A/B and token ring cables. It can test cables up to 1,000ft away through wall plates and patch panels using the remote terminator. Featuring pin-out LED indicators, it can also do an auto or manual scan. It also performs verification for continuity, opens, shorts reversed pairs and cable ground. It can also test whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.

Features and Benefits

Robust and simple design Power switch for conserving battery Tester and terminator

Applications

Security systems Data centres Telecommunication

Certifications

ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

規格
Attribute Value
Classification Cat5, Cat5e, Cat6
Equipment Type Cable Tester
Connector Type BNC, RJ11, RJ45
Power Source Battery
113 現貨庫存,可於3工作日發貨。
單價 個
HK$ 1,125.58
(不含稅)
單位
Per unit
1 +
HK$1,125.58