Molex Premise Networks Cable Tester STP, UTP, SLT3S
- RS庫存編號:
- 215-6391
- 製造零件編號:
- 33A-100-10
- 製造商:
- Molex Premise Networks
單價 个
HK$1,154.25
19 現貨庫存，可於3工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 HK$850.00 即可享受 免費 送貨服務
單位 | 每單位 |
|---|---|
| 1 + | HK$1,154.25 |
- RS庫存編號:
- 215-6391
- 製造零件編號:
- 33A-100-10
- 製造商:
- Molex Premise Networks
- COO (Country of Origin):
- US
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox
Features and Benefits
• Built-in modular jacks on both units for testing USOC, 568A and 568B cabling
• Verification of correct wiring sequence
• Pin-point accuracy of cable continuity and sequencing of 1, 2, 3 and 4 pair shielded and unshielded twisted pair cabling
• The LED display provides a clear view and visual indication of mis-wires, shorts, open circuit and reversed wiring
• Manufactured from high-quality impact resistant materials
• A compact and lightweight device
• Master and remote units conveniently snap and lock together when not in use
• Proximity switch disconnects the battery when not in use saving valuable power.
• Requires a 9 volt alkaline battery see part number 826-4435
• Verification of correct wiring sequence
• Pin-point accuracy of cable continuity and sequencing of 1, 2, 3 and 4 pair shielded and unshielded twisted pair cabling
• The LED display provides a clear view and visual indication of mis-wires, shorts, open circuit and reversed wiring
• Manufactured from high-quality impact resistant materials
• A compact and lightweight device
• Master and remote units conveniently snap and lock together when not in use
• Proximity switch disconnects the battery when not in use saving valuable power.
• Requires a 9 volt alkaline battery see part number 826-4435
Applications
The Molex 33A-100-10 wiring tester can be used in any applications where UTP and STP cabling is or is going to be installed. Ensuring structured data cables are wired correctly is essential as incorrect wiring can be extremely costly to rectify. Some of the most common applications and environments are
• Data centres
• Schools and colleges
• Factories and warehouses
• Office blocks
• Hospitals and laboratories
• Manufacturing sites
• Schools and colleges
• Factories and warehouses
• Office blocks
• Hospitals and laboratories
• Manufacturing sites
Molex Premise Networks Network Cable Tester, 9V Battery, LED Display - 33A-100-10
This network cable tester by Molex Premise Networks is a versatile tool designed to verify the integrity of 1-, 2-, 3-, and 4-pair UTP or STP channels. With a unique 3-in-1 design and comprehensive testing capabilities, this battery-powered tester is essential for anyone working with cabling systems.
Features & Benefits
• Rugged and lightweight design
• Built-in modular jacks for USOC, 568A and 568B wiring sequences
• Battery-powered for convenient portability
• End-to-end testing for installed cabling
• Continuously-sequencing LED display for quick error detection
• Snap and lock mechanism for easy storage
• Durable nylon carry case available as an optional accessory
• Built-in modular jacks for USOC, 568A and 568B wiring sequences
• Battery-powered for convenient portability
• End-to-end testing for installed cabling
• Continuously-sequencing LED display for quick error detection
• Snap and lock mechanism for easy storage
• Durable nylon carry case available as an optional accessory
Applications
• Verifying wiring errors on 2-, 3-, and 4-pair UTP and STP channels
• Testing from the punch down block to the wall plate
• Ideal for use by designers, installers, and testers of cabling systems
• Testing from the punch down block to the wall plate
• Ideal for use by designers, installers, and testers of cabling systems
Can it detect shorts, opens, reversals, or mis-wires in seconds?
Yes, it can detect these errors immediately with its LED display.
Will it verify the continuity and sequence of UTP and STP channels accurately?
Yes, the tester provides a diagnostic readout for immediate error detection.
Is the battery included in the package?
Yes, the 9 volt alkaline battery comes with the tester for your convenience.
Attribute | Value |
|---|---|
| Equipment Type | Cable Tester |
| Connector Type | STP, UTP |
| Power Source | Battery |
| Battery Type | 9V |
| Dimensions | 146 x 58 x 38mm |
| Weight | 284g |
| Display Type | LED |
| Height | 144mm |
| Width | 60mm |
| Model Number p | SLT3S |