Schneider Electric Plug In Non-Latching Relay, 24V dc Coil, 5A Switching Current, 4PDT

Introducing Schneider Electric instantaneous range of relays, they are commonly referred to as the RHN series. This range of plug-in automation relays is on an RHZ-21-type base. The face on the front of the relay pivots and has three different functions. These are Removal latch, dust protection and protection from moving components as well as stop-locking.

Range of plug-in automation relays on an RHZ-21-type base.
The pivoting front face has three functions: removal latch, dust protection and protection from moving components, and stop-locking.
Relay self-locks onto the base by snap-fitting.

A relay is an electrical switch that is operated by electrical pulses, their primary function is to open and close a circuit. When power passes through a circuit, a relay switches position (usually from NC to NO) using an internal coil which generates a magnetic force. This force then holds the relay in a NO position, when the current is switched off the relay returns to the NC position. This function is what makes these non-latching relays perfect for push-button applications such as keyboards and micro-controller input buttons.

  UL, CSA, VDE, NF C and IEC

• Forms part of the Zelio Relay range
• The contacts composition - 4 C/O
• The control circuit voltage is 24 V DC
• Without LED
• Instantaneous and standard contact operation
• Manual control type
• 250 V rated insulation voltage
• Mechanically durable up to 20000000 cycles
• Can be operated in any position