Siemens SIMATIC S7-300 Series PLC I/O Module 4 Inputs, 2 Outputs 24 V dc, 125 x 40 x 120 mm

  • RS庫存編號 612-9084
  • 製造零件編號 6ES7334-0CE01-0AA0
  • 製造商 Siemens
產品概覽和技術數據資料表
法例與合規
不適用
COO (Country of Origin): DE
產品詳細資訊

SIMATIC S7-300C - Expansion Modules

Expansion modules with digital and analogue inputs and outputs
Required front connector:
-Stock no. 453-2573 for SM321/322/332
-Stock no. 453-2589 for SM331

Subassembly SM 321
16 DE (DC)
SM 322
16 DA (DC)
SM 322
8 DA (rel.)
SN 322
16 DA (AC)
SN 322
8 DA (AC)
Inputs 16 digital
inputs
- - - -
Input type 24V DC - - - -
Input voltage. 20.4 to 28.8V - - - -
Electrical isolation Yes - - - -
in groups of 1 input - - - -
Outputs - 16 digital
outputs
8 relay
outputs
16 relay
outputs
8 relay
outputs
Output type - 24V DC Relay    
Output current - 0.5A 4A per group 8A 5A
Output voltage. - L+ -0.8V 24 to 120Vdc,
48 to 230Vac
120Vdc,
230Vac
240Vdc,
230Vac
Electrical isolation - Yes      
in groups of - 2 outputs   1 output 8 outputs
Dimensions 40x125x120mm        
Subassembly SM 331 8 AE SM 331 8AE SM 331 8/4AE
Inputs 8 analogue inputs   8 analogue inputs,
4 with resistance measurement
Input type Voltage, current,
resistance
Voltage, current Voltage, current
thermocouples,
resistance
Input ranges ±50mV, ±500mV, ±1V,
±5V, 1 to 5V, ±10V,
0 to 10V, ±20mA,
0 to 20mA, 4 to 20mA,
0 to 600Ω, 0 to 6kΩ
-1 to 5V, -1 to 10V
±1V, ±10V,
±5V, -0 to 20mA,
±20mA, 4 to 20mA
max.±10V (8 areas),
±20mA (5 ranges),
thermocouples E, J, K and N,
resistance to 6000Ohm (4 ranges),
Ni100, Pt100
Resolution 13 bit 14 Bit 15 Bit
Electrical isolation Yes Yes, to rear panel bus Yes
Outputs - - -
Output type - - -
Output ranges - - -
Resolution - - -
Electrical isolation - - -
Dimensions 40x125x120mm 40x125x120mm 40x125x120mm
Subassembly SM 332 4 AA SM 334 4AE/2AA SM 334 4/4AE/2AA
Inputs - 4 analogue inputs 4 analogue inputs, 4 for
resistance measurement
Input type - Voltage, current Voltage, resistance
Input ranges - 10 to 10V, 0 to 20mA 0 to 10V, 0 to 10,000 Ohm, Pt100
Resolution - 8 bit 12 bit
Electrical isolation - No Yes
Outputs 4 analogue outputs 2 analogue outputs 2 analogue outputs
Output type Voltage, current Voltage, current Voltage
Output ranges 1 to 5V,±10V,
0 to 10V, ±20mA,
0 to 20mA, 4 to 20mA
0 to 10V, 0 to 20mA 0 to 10V
Resolution 12 bit 8 bit 12 bit
Electrical isolation Yes No Yes
Dimensions 40x125x120mm 40x125x120mm 40x125x120mm
Cross-reference to manufacturer's part number
Stock no. Manuf. Part no. Stock no. Manuf. Part no.

453-2517
6ES7 321-1BH02-0AA0
469-1694
6ES7 322-1HF01-0AA0

453-2539
6ES7 322-1BH01-0AA0
225-381
6ES7 331-1KF01-0AB0

453-2646
6ES7322-1HH01-0AA0
453-2551
6ES7 332-5HD01-0AB0

453-2630
6ES7322-5HF00-0AB0
612-9078
6ES73317HF010ABO

453-2545
6ES73317KF020ABO
612-9084
6ES73340CE010AAO

612-9090
6ES73340KE000ABO    

Siemens S7-300 Digital and Analogue I/O Modules

Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of 8 expansion modules each.,All expansion modules share the following features:

Compact design
LED’s input signal status indication
Front panel connector for actuators or sensors. Connectors can be coded according to application, thus preventing the connection of an incorrect unit
No slot rules: the address of the input corresponds to the slot number
Modules may be configured and the parameters set using STEP 7 Lite software
Data is stored centrally. When a module is removed/replaced data is automatically sent to the new module, removing possible set up errors

規格
Attribute Value
Manufacturer Series SIMATIC S7-300 Series
Number of Inputs 4
Number of Outputs 2
Input Type Analogue
Output Type Analogue
For Use With SIMATIC S7-300 Series
Number of I/O 6
Voltage Category 24 V dc
Length 125mm
Width 40mm
Depth 120mm
Dimensions 125 x 40 x 120 mm
5 現貨庫存,可於4工作日發貨。
單價 個
HK$ 4,256.91
(不含稅)
單位
Per unit
1 +
HK$4,256.91