Siemens PLC I/O Module 2 Inputs, , 125 x 40 x 120 mm

  • RS庫存編號 746-6621
  • 製造零件編號 6ES7331-7KB02-0AB0
  • 製造商 Siemens
產品概覽和技術數據資料表
法例與合規
不適用
COO (Country of Origin): DE
產品詳細資訊

SIMATIC S7-300C - Expansion Modules

Expansion modules with digital and analogue inputs and outputs
Required front connector:
-Stock no. 453-2573 for SM321/322/332
-Stock no. 453-2589 for SM331

Siemens Analogue Expansion Module

The Siemens analogue expansion module is designed for S7-300 PLCs. This module has 2 integrated analogue inputs. It receives input in the form of voltage, current, thermocouple and resistance thermometer. The expansion module takes input from thermocouples like type E, J, K, L and N. There is a front panel connector for actuators or sensors. Connectors can be coded according to the application, thus preventing the connection of an incorrect unit. Data is stored centrally in the system, hence when a module is removed/replaced, data is automatically sent to the new module, removing the possible set-up errors. It has various advanced features like short-circuit protection, alarms and extensive diagnostics and galvanic isolation between the channels and the backplane bus that make it an ideal expansion module for various applications.

Features and Benefits

Input power supply is 24VDC 9/12/14bit resolution Compact design LEDs input signal status indication Modules may be configured and the parameters set using STEP 7 Lite software

Applications

Industrial automation Robotics Automobile industry

Certifications

ANSI/ESD S20.20:2014 BSEN 61340-5-1:2007

Siemens S7-300 Digital and Analogue I/O Modules

Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of 8 expansion modules each.,All expansion modules share the following features:

Compact design
LED’s input signal status indication
Front panel connector for actuators or sensors. Connectors can be coded according to application, thus preventing the connection of an incorrect unit
No slot rules: the address of the input corresponds to the slot number
Modules may be configured and the parameters set using STEP 7 Lite software
Data is stored centrally. When a module is removed/replaced data is automatically sent to the new module, removing possible set up errors

規格
Attribute Value
Number of Inputs 2
Input Type Analogue
For Use With SIMATIC S7-300 Series
Module Type Input
Length 125mm
Width 40mm
Depth 120mm
Dimensions 125 x 40 x 120 mm
7 在3 工作日內發貨 (海外庫存)
7 在4 工作日內發貨 (海外庫存)
單價 個
HK$ 3,720.00
(不含稅)
單位
Per unit
1 +
HK$3,720.00