- RS庫存編號:
- 200-8804
- 製造零件編號:
- HVL30
- 製造商:
- Hi-Force
當前暫無庫存,可於2024/4/18發貨,3 工作日送達。
單價 个
HK$5,429.81
單位 | Per unit |
1 + | HK$5,429.81 |
替代產品
該產品我們目前不提供。 這是我們推薦的替代產品。
- RS庫存編號:
- 200-8804
- 製造零件編號:
- HVL30
- 製造商:
- Hi-Force
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- GB
產品詳細資訊
Very Low Height Cylinders
Very low height cylinders combine minimum closed height with maximum stroke to provide a short adjusting and lifting force in very confined work areas
All cylinders have a 6mm stroke and are manufactured to the same high standards as our existing range of cylinders
All cylinders have a 6mm stroke and are manufactured to the same high standards as our existing range of cylinders
Warning
Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Low Height Cylinders
High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately
規格
Attribute | Value |
---|---|
Stroke | 6mm |
Capacity | 32t |
Closed Height | 34mm |
Single/Double Acting | Single |
Manufacturer Series | HVL |
Extended Height | 40mm |
Cylinder Effective Area | 45.6cm² |
Oil Capacity | 27cm³ |
Outside Diameter | 120mm |
Maximum Operating Pressure | 700 bar |
Weight | 3kg |