- RS庫存編號:
- 518-4434
- 製造商:
- RS PRO
- RS庫存編號:
- 518-4434
- 製造商:
- RS PRO
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- DE
產品詳細資訊
RS PRO Gas, Liquid Gauge Pressure Switch, Analogue 0 → 10 bar, 10 → 30 V DC, G1/4 process connection
This robust pressure switch from the trusted RS PRO range is made to measure pressures of 0 bar to 10 bar in liquid and gaseous media. It's suitable for use in various industrial applications, like in the medical, aviation, automotive and marine fields.
The product uses a piezo-resistive strain gauge sensor, which converts pressure into a linearly-proportional analogue electrical signal of between 4 mA and 20 mA. It's enclosed within a stainless steel housing and has an operational temperature range of -20°C to +125°C. There's a 1/4-inch threaded connector to attach to a panel or housing so the sensor comes into contact with the medium.
Electrical connections to the switch are made using a four-pin M12 connector. The sensor is powered by a DC voltage of between 10 V and 30 V, so it can use a number of different power sources.
The product uses a piezo-resistive strain gauge sensor, which converts pressure into a linearly-proportional analogue electrical signal of between 4 mA and 20 mA. It's enclosed within a stainless steel housing and has an operational temperature range of -20°C to +125°C. There's a 1/4-inch threaded connector to attach to a panel or housing so the sensor comes into contact with the medium.
Electrical connections to the switch are made using a four-pin M12 connector. The sensor is powered by a DC voltage of between 10 V and 30 V, so it can use a number of different power sources.
Features and Benefits
Pressure switch
Measurement of gas and liquid media
Not front-flush mounting
Accuracy of ≤ 0.5%
Pressure reading range of 0 bar to 10 bar
Response time of ≤ 3 ms
Electrical connection using M12 connector
G1/4 process connection
Operational temperature range of -20°C to +125°C
Supply voltage of 10 V to 30 V DC
Analogue current output of 4 mA to 20 mA
Housing of 303 stainless steel material
IP rating of IP67
Measurement of gas and liquid media
Not front-flush mounting
Accuracy of ≤ 0.5%
Pressure reading range of 0 bar to 10 bar
Response time of ≤ 3 ms
Electrical connection using M12 connector
G1/4 process connection
Operational temperature range of -20°C to +125°C
Supply voltage of 10 V to 30 V DC
Analogue current output of 4 mA to 20 mA
Housing of 303 stainless steel material
IP rating of IP67
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
規格
Attribute | Value |
---|---|
Pressure Reading Type | Gauge |
Minimum Pressure Reading | 0bar |
Maximum Pressure Reading | 10bar |
Accuracy | ≤0.5 % |
Output Type | Analogue |
Media Measured | Gas, Liquid |
Process Connection | G1/4 |
Analogue Output | 4 → 20 mA |
Electrical Connection | M12 Connector |
Response Time | ≤3 ms |
Supply Voltage | 10 → 30 V dc |
Housing Material | Stainless Steel |
Minimum Operating Temperature | -20°C |
IP Rating | IP67 |
Maximum Operating Temperature | +125°C |
Mounting Type | Not Front-Flush |