Pressmaster Ratchet Crimping Tool

  • RS庫存編號 298-1046
  • 製造零件編號 4300-2436
  • 製造商 Pressmaster
產品概覽和技術數據資料表
法例與合規
不適用
COO (Country of Origin): SE
產品詳細資訊

Pressmaster Komfort/Original Line

The Pressmaster range of Komfort tools are ergonomically designed to give maximum comfort with the minimum hand pressure required for reliable and repeatable crimping. The standard version has extended handles allowing two handed operation for improved leverage, reducing fatigue and increasing productivity. All tools include full ratchet action with release mechanism. General operating instructions are included with each tool. The Pressmaster Original Line tool is a high quality steel frame tool with ratchet action designed for crimping coaxial cables as specified. General operating instructions included.
All these Pressmaster hand crimp tools are supplied with die sets.

General Support Tooling

The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for which each tool is recommended. The 'Die Set Selection Guide' table indicates compatible cable types and their 'Group number' and details of frame tool required. A small number of crimp tools have been considered to be 'dedicated' to a connector type. These tools have been incorporated with those connector ranges on respective pages, and are not included within this General Tooling Range.

Crimp Tool Selection Guide
Tool Stock no BNC TNC N 1.6 / 5.6 SMA SMB UHF Mini UHF Die Set Apertures (mm) Typical Cable Types
298-1046   !         6.48, 5.41, 1.69 RG58, 59, 62, 71
298-1080           4.52, 3.25, 1.69 RG174, RG179
447-459               4.52, 1.69 MIN RG59, 179
456-431             5.38 to 5.43, RG58, URM43, URM76
456-447             6.45 to 6.50, RG59, RG62
473-0648       6.45 to 6.50, 1.68 to 1.71 RG59, URM70
456-778         6.48, 5.40, 1.70 n/a
241-8380             10.9, 5.41, 2.54, 1.69 RG58, 213, 214
Note: Where a ’! ’ is shown in this first table with respect to the 1.6 / 5.6 series of connectors, users should be aware that the two tools identified will crimp the outer ferrule of the connector only.
Die Set Selection Guide
Die Set Stock no Die Set Typical Cables (Cable Groups) Use Frame Tool Die Set Apertures
431-4432 Y1508 BT2002VQ 425-6156 0.057, 0.204 ( in )
431-4448 Y1503 BT3002VC 425-6156 0.057, 0.178 ( in )
431-4505 Y1509 BT2003VR 425-6156 0.057, 0.268 ( in )
425-6162 Y1829 BT2003 (H) 425-6156 0.068, 0.296 ( in )
431-4454 Y1514 RG58 (A) 425-6156 0.067, 0.213 ( in )
431-4460 Y1505 RG59 (F) 425-6156 0.057, 0.255 ( in )
431-4498 Y110 RG213 (T) 425-6156 0.10, 0.429 ( in )
848-436 - RG58, 59 (A, F, K) 848-391 6.48, 5.41, 1.72 ( mm )
282-3502 - RG174, 178, 179 (B, E, N) 848-391 3.25, 2.68, 1.71 ( mm )
158-8961 - BT2002, 2003 (H, J) 848-391 6.81, 5.18, 1.46 ( mm )
241-8396 - RG213, 214 (T, W) 848-391 10.89, 2.54, 2.03, 1.72 ( mm )
規格
Attribute Value
Crimp Tool Type Ratchet
1 現貨庫存,可於3工作日發貨。
單價 個
HK$ 1,262.74
(不含稅)
單位
Per unit
1 - 4
HK$1,262.74
5 - 9
HK$1,220.25
10 - 24
HK$1,119.60
25 - 49
HK$1,085.06
50 +
HK$1,077.91