Pre assembled double insulated crane pendants for single speed motor applications
Mechanically interlocked between pairs
For light duty Pendant switch see also Stock no 507481
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.
Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support
Attribute | Value |
---|---|
Series | Harmony XACA |
Number of Cutouts | 3 |
Push Button Marking | Down Arrow, E-Stop, Up Arrow |
Push Button Colour | Black, Red, White |
Number Of Push Buttons | 3 |
Enclosure Colour | Yellow |
Contact Configuration | 2NO/3NC |
IP Rating | IP65 |
Push Button Actuation | Latching |
Maximum Current | 3 A ac, 270 mA dc |
Minimum Operating Temperature | -25°C |
Maximum Operating Temperature | +70°C |
Maximum AC Voltage | 600V |
Terminal Type | Screw |
Maximum DC Voltage | 600V |