Schneider Electric Screw Clamp 2NO/NC First & Second Push Button, NO Third & Fourth Push Button 5

COO (Country of Origin): CZ

Pendant Control Station XAC-A

Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards

CE marking
UL/CSA certification
Double insulated polypropylene casing
Screw clamp connection

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Attribute Value
Series Harmony XACA
Number of Cutouts 5
Push Button Marking Down Arrow, E-Stop, Left Arrow, Up Arrow
Push Button Colour Black, Red, White
Push Button Style Rectangular, Round
Enclosure Colour Yellow
Number Of Push Buttons 5
Enclosure Material PP
Contact Configuration NO Third & Fourth Push Button, 2NO/NC First & Second Push Button
IP Rating IP65
Cutout Diameter 40mm
Push Button Actuation Latching
Cable Termination Type Screw Clamp
Length 440mm
Dimensions 440 x 80 x 70 mm
Minimum Operating Temperature -25°C
Depth 70mm
Width 80mm
Terminal Type Screw
Maximum AC Voltage 600V
Maximum DC Voltage 600V
Maximum Current 3 A ac, 270 mA dc
Maximum Operating Temperature +70°C
14 現貨庫存,可於3工作日發貨。
單價 個
HK$ 1,262.32
Per unit
1 +