Kopp Inline RCD Adapter 2 Pole ,Rated At 16A,230 V ac

Stops the electrical accident after the socket — in the event of a fault, the quick electronics interrupt the current within ≤15 ms. All-pole shutdown.
With undervoltage release — if there is a power failure, the DIperfekt automatically switches off —
once line voltage is present again, it must be switched on manually. This prevents connected electrical equipment from starting up accidentally and unmonitored, which can cause damage.

Use up to -25 °C
Pulse current sensitive
Zero volt release
All-pole shutdown
Safety earth conductor monitoring
Protection rating IP40

Large switch-on button
Small off and test button
Protection rating: IP54
Suitable for tough operation
All-pole shutdown: L+N+PE
PE monitoring
Undervoltage release
For low temperatures
Pulse current sensitive
Can be connected to lines up to 3 x 2.5 mm²
Outer diameter max. 15 mm

VDE, ÖVE, TÜV, GS

DI Circuit Breaker

Universal protection for use anywhere
Personal protection plug and adapter

The personal protection plugs and adapters provide portable protection equipment for increasing the protection level according to DIN VDE 0661. The devices have a rated difference current of ≤30 mA and thus provide additional protection even with direct contact of voltage-conducting parts as well as required fire protection in the sense of DIN VDE 0100 Part 410. Similar to the RCCB, the DIperfekt devices also function on the differential current principle. The actuator works with super-fast electronics. This means that when it misses exterior or neutral conductors, the DIperfekt immediately switches off, or even prevents switching on. Even sinking below a defined voltage value triggers an actuation. All-pole shutdown L + N + PE; the total release time is less than 15 ms. PE monitoring is also covered, as this conductor is also governed by the difference current converter. The all-pole shutdown and the PE monitoring result in additional protection against "reverse" fed rest currents. The protection equipment is suitable for use at ambient temperatures from -25 °C → +40 °C. The DIperfekt provides optimal backup protection, and it can also be inexpensively and quickly retrofitted for safety even in earthing areas. To increase site safety for the user and to prevent unintended actuation, a varistor was installed in the safety earth conductor circuit. Portable protection equipment according to DIN VDE 0661.