PNOZmulti Series Safety Controller, 20 Safety Inputs, 6 Safety Outputs, 24 V dc

  • RS庫存編號 619-2666
  • 製造零件編號 773110
  • 製造商 Pilz
產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): DE
產品詳細資訊

PNOZmulti Base Unit Base Unit, Safety Functions (Fieldbus only, no Expansion Modules)

One system covers both safety-related (E-stop, light curtain etc) and standard control functions
Economical non-expandable solution
Simple wiring means short commissioning times
Simple intuitive programming resulting in time and cost saving
Flexible to apply, as only one solution required for applications up to Category 4 (EN954-1) and applications up to SIL 3 (EN61508)
Simple, user-friendly diagnostics mean short down-time and high plant availability
Compact design, DIN rail mount
Certified worldwide

Note

Configuration software and pre-license sold separately (stock no. 619-2767).
Call Pilz to register, this activates the software and is used for technical queries and support from Pilz.
In order to program the controller from your PC you will need an adaptor (stock no. 218-239) and cable (stock no. 812-926).

Standards

EN954-1 (Cat 2,3,4), EN60204-1, EN61508 (SIL3) and others

Approvals

UL, CCC, GOST R, TUV, NFPA 79:2002, UL508, OSHA

Supplied with

Plug-in screw terminals and 32K SIM card

Pilz Safety Controller

The Pilz PNOZmulti series is a 20 safety inputs and 6 safety outputs safety controller. This is an innovative device with positiv: guided relay outputs and semiconductor outputs. The safety function remains effective in the case of a component failure. The relay contacts meet the requirements for safe separation through increased insulation. The safety outputs are tested periodically using a disconnection test.

Note
Configuration software and pre: license sold separately
Call Pilz to register, this activates the software and is used for technical queries and support from Pilz
In order to program the controller from your PC, you will need an adaptor and cable

Supplied with
Plug: in screw terminals and 32K SIM card

Features and Benefits


E-STOP pushbutton
• Two: hand button
• Safety gate limit switch
• Reset button
• Light barrier
• Scanner
• Enable switch
• PSEN – operating mode selector switch – safety mat
• LED indicator for diagnostics, supply voltage, output circuits, and input circuits
• Circuit is redundant with built: in self: monitoring
• Max. 8 expansion modules and 1 fieldbus module can be connected
• Monitors shorts between the safety outputs
• Plug: in connection terminals (either cage clamp terminal or screw terminal)
• One system covers both safety: related (E: stop, light curtain etc) and standard control functions
• Economical non: expandable solution
• Simple wiring means short commissioning times
• Simple intuitive programming resulting in time and cost saving
• Flexible to apply, as only one solution required for applications up to category 4 (EN954: 1) and applications up to SIL 3 (EN61508)
• Simple, user: friendly diagnostics mean short down: time, and high plant availability
• Compact design, DIN rail mount

Certifications

• UL listed
• CCC certified
• BG certified
• VDE 0113Part 1
• EN 60204: 1
• GOST R certified
• TUV certified
• NFPA 79: 2002

Approvals

UL, CCC, GOST R, TUV, NFPA 79:2002, UL508, OSHA

規格
Attribute Value
Series PNOZmulti
Number of I/O 24
Number of Safety Inputs 20
Number of Safety Outputs 6
Safety Category 4
SIL SIL 3
Supply Voltage 24 V dc
Contact Current Rating 2 A
Contact Voltage Rating 24 V dc
IP Rating IP20, IP54
Dimensions 121 x 94 x 135 mm
Length 121mm
Width 94mm
Depth 135mm
10 在3 工作日內發貨 (海外庫存)
37 在3 工作日內發貨 (海外庫存)
單價 個
HK$ 5,434.34
(不含稅)
單位
Per unit
1 +
HK$5,434.34