Burkert Solenoid Valve 076551, 2 port , NC, 230 V ac, 1/2in

  • RS庫存編號 440-947
  • 製造零件編號 076551
  • 製造商 Burkert
產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): DE
產品詳細資訊
//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif
//media.rs-online.com/t_line/L478735-22.gif
//media.rs-online.com/t_line/LD439155-02.gif
//media.rs-online.com/t_line/LE439155-02.gif
//media.rs-online.com/t_line/LI439155-02.gif

Burkert Solenoid Valve

The Burkert 0255 series 1/2in G female solenoid valve has a supply voltage rating of 230VAC. This 2-port NC position valve is suitable for high-pressures and temperatures. This direct-acting plunger solenoid valve has heat-resistant slip-over epoxy encapsulated coil. Its maximum opening and closing time are 20ms and 30ms. This valve is used with water, steam, air, gasses, hot oils and hydrocarbons, alkaline washing agents.
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Features and Benefits

Maximum working pressure is 12bar
Brass body and PTFE Seal
Flow factor(Kv) is 0.5m³/h
Operating temperature ranges between -40°C and 55°C
Power consumption ranges between 35VA and 40VA (inrush AC)
Push-over solenoid system
Three-pin DIN connector can be positioned 360° in 90° increments

Certifications

IP65 rated

規格
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Alcohol, Fuel, Hydraulic Oil, Organic Solvent, Steam, Waste Gas, Water
Type 2/2
Orifice Diameter 4mm
Body Material Brass
Maximum Working Pressure 12 bar
Operating Temperature Range -40 → +55 °C
Minimum Operating Temperature -40°C
Maximum Operating Temperature +55°C
Maximum Opening Time 20ms
Maximum Closing Time 30ms
Series 0255
Connection Gender Female
Flow Factor Kv 0.5m³/h
Thread Standard or Connection Type G
當前暫無庫存,可於2020/11/12發貨,3 工作日送達。
單價 個
HK$ 1,633.92
(不含稅)
單位
Per unit
1 - 5
HK$1,633.92
6 +
HK$1,543.33