INA GE30-FW-2RS-A 30mm Bore Plain Bearing, 353000N Radial Load Rating, 55mm O.D
- RS庫存編號:
- 191-3877
- 製造零件編號:
- GE30-FW-2RS-A
- 製造商:
- INA
當前暫無庫存，可於2024/5/29發貨，3 工作日送達。
已增加
單價 个
HK$1,105.44
| 單位 | Per unit |
| 1 - 12 | HK$1,105.44 |
| 13 - 24 | HK$1,061.22 |
| 25 + | HK$1,039.06 |
- RS庫存編號:
- 191-3877
- 製造零件編號:
- GE30-FW-2RS-A
- 製造商:
- INA
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
規格
Attribute | Value |
|---|---|
| Bore Size | 30mm |
| Outside Diameter | 55mm |
| Static Radial Load Rating | 353000N |