Freewheel Built-In ASNU 12mm

  • RS庫存編號 146-5269
  • 製造零件編號 ASNU 12
  • 製造商 Stieber
產品概覽和技術數據資料表
法例與合規
不適用
產品詳細資訊

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

規格
Attribute Value
Series 63
Inside Diameter 12mm
Outside Diameter 35mm
Race Width 13mm
Torque 12Nm
Over-running Speed 3300 (Inner) rpm, 50000 (Outer) rpm
Keyway Inner and Outer Race
Drag Torque 1.6Ncm
1 現貨庫存,可於3工作日發貨。
單價 個
HK$ 1,288.26
(不含稅)
單位
Per unit
1 - 4
HK$1,288.26
5 +
HK$1,236.75