Murata Power Solutions Non-Isolated DC-DC Converter, 12V dc Input, 5V dc Output, 1.5A

產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): CN
產品詳細資訊

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series

The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits

Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance

Approvals

UL/EN/IEC 60950-1, 2nd Edition

Murata Power Solutions Non-Isolated DC-DC Converter

The Murata Power Solutions Non-Isolated DC-DC converter is used for the embedded application. It has three nominal output voltage terminals and up to 1.5A is the maximum output. The ultra-wide input range of upto 12VDC. Based on fixed frequency the high efficiency means very low heat and low electrical noise requiring no external component. The fixed single output converters provide both tight regulation and high efficiency directly at power usage site and are direct plug-in instead of linear regulators hence no extra outside component is required

Features and Benefits

High efficiency with no external components No heat sink direct replacement for 3-terminal Operating temperature is from -40°Cto 85°C Outstanding thermal derating performance Short circuit protection Vertical SIP or horizontal mount, small footprint, in an encapsulated package

Applications

Control boxes Control boxes ITE commercials ITE commercials

Certifications

UL certified

規格
Attribute Value
Input Voltage 12V dc
Output Voltage 5V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 7.5W
Mounting Type Through Hole
Package TO-220
Minimum Temperature -40°C
Maximum Temperature +85°C
MTBF 78700000h
Load Regulation ±0.4%
Line Regulation ±0.25%
Ripple And Noise 40mV Pk-Pk
Power Signal Conversion Type DC-DC
Series OKI-78SR
Depth 16.5mm
Width 8.6mm
Maximum Input Current 690mA
Rated Output Power 7.5W
Weight 2g
Switching Frequency Range 500kHz
Length 10.4mm
Allowed Circuit Configurations Parallel
Protection Features Short Circuit Protection
6 現貨庫存,可於3工作日發貨。
單價 毎卷:360 個
HK$ 11,977.20
(不含稅)
Reel(s)
Per Reel
Per unit*
1 - 1
HK$11,977.20
HK$33.27
2 - 2
HK$11,406.83
HK$31.686
3 +
HK$10,508.09
HK$29.189
* 參考價格