Heat Guns | Cordless Heat Gun | RS
最近搜索

    Heat Guns

    Heat Guns are handheld tools that use a stream of hot air which is heated by a built-in element at temperatures between 100°C and 550°C. Heavy-duty heat guns operate at hotter temperatures of plus 700°C. Heat Guns allow you to concentrate the heat onto a targeted area or surface and also give you control using the on and off trigger. If you need advice on how to use these tools, you can consult our Heat Guns Guide.

    How A Heat Gun Works

    The heat used by the Heat Gun is produced by a fan built into the back of the gun within the gun which draws air in and then passes the cold air over the heating elements which then creates the required stream of hot air.

    How To Use A Heat Gun

    • Heat Guns should be held at an angle of 45° from the area you target but never hold the stream of heated air in one place for more than a few seconds. This could damage and burn your work surface.
    • When stripping paint from a surface use the Heat Gun to soften the paint until it bubbles and blisters.
    • Remove the Heat Gin from the surface then use a scraping tool to remove the paint from the work surface.

    Uses for Heat Guns

    • Stripping Paint including lead paint (lead paint, use temperatures below 590° minimising vaporisation)
    • Heat Shrink Tubing
    • Shrink Film
    • Shrink Wrap Packaging
    • Wood - helps to dry out damp wood
    • Plastic – assists help in welding, bending and shaping plastic
    • Adhesive softening
    • Thawing frozen pipes
    • Electronics – De-soldering
    • Rework surface-mounted circuit boards

    32 產品顯示為 Heat Guns

    Heat Gun
    550L/min
    1.6kW
    Corded
    240V
    500°C
    Type C - EuroPlug
    -
    750g
    EOT0202
    Heat Gun
    500L/min
    2kW
    Corded
    220 → 240V
    550°C
    Type C - EuroPlug
    -
    750g
    EOT0201
    Steinel
    Heat Gun
    450L/min
    1.6kW
    Corded
    240V
    500°C
    Type G - British
    34mm
    670g
    HL1620S
    Steinel
    Heat Gun
    500L/min
    1.4kW
    Corded
    110V
    650°C
    BS 4343
    34mm
    940g
    HG2320E
    Steinel
    Heat Gun
    500L/min
    1.8kW
    Corded
    240V
    600°C
    Type G - British 3-pin
    34mm
    804g
    HL1820
    SAM
    Heat Gun Surface Nozzle
    -
    -
    Cordless
    -
    -
    -
    -
    -
    N1877-1.
    Steinel
    Heat Gun
    500L/min
    1.8kW
    -
    230V
    600°C
    Type C - EuroPlug
    34mm
    804g
    HL 1820 S
    Steinel
    Heat Gun Flat Nozzle
    -
    -
    -
    -
    600°C
    -
    -
    -
    0923131
    SAM
    Heat Gun Reduction Nozzle
    -
    -
    Cordless
    ΩV
    -
    -
    -
    -
    DT-20-G
    Steinel
    Heat Gun
    800L/min
    3.4kW
    Corded
    230V
    600°C
    Type G - British 3-pin
    50mm
    1200g
    HG5000E
    Steinel
    Heat Gun
    500L/min
    2.3kW
    Corded
    240V
    650°C
    Type G - British 3-pin
    34mm
    940g
    HG2320E
    Steinel
    Heat Gun
    500L/min
    2.3kW
    Corded
    230V
    650°C
    Type C - EuroPlug
    34mm
    940g
    HG2320E
    Steinel
    Heat Gun
    500L/min
    2.3kW
    Corded
    240V
    700°C
    Type G - British 3-pin
    30mm
    840g
    HG2620E
    Steinel
    Heat Gun Welding Nozzle
    -
    -
    -
    -
    650°C
    -
    -
    -
    0709151
    Steinel
    -
    200L/min
    -
    Cordless
    18V
    500°C
    -
    -
    -
    MH3
    DeWALT
    Heat Gun
    450L/min
    1.8kW
    Corded
    240V
    600°C
    Type G - British 3-pin
    -
    800g
    D26411-GB
    Steinel
    Heat Gun Flat Nozzle
    -
    -
    -
    -
    600°C
    -
    -
    -
    40X2 HG4000E
    Steinel
    Heat Gun Angle Nozzle
    -
    -
    -
    -
    600°C
    -
    -
    -
    0928181
    SAM
    Heat Gun Surface Nozzle
    -
    -
    Cordless
    -
    -
    -
    -
    -
    DT-20-A
    Steinel
    Heat Gun Surface Nozzle
    -
    -
    -
    -
    650°C
    -
    -
    -
    0702121
    每頁顯示的結果