Oscilloscope Probes

An oscilloscope is considered to be the most used instrument for electrical engineers who need to measure electrical characteristics of electronic devices but you also need at least one probe.
Things to consider when choosing probes
• Ensure the probe's input connector matches the connector on your scope
• Choose a probe whose input resistance and capacitance match the input resistance and capacitance of your scope - matching is critical for guaranteeing proper signal transfer and signal accuracy
The best approach, for matching a probe with a scope, is to first choose a probe whose capacitance is within the range of your scope and then fine-tune the probe's capacitance by adjusting its compensation network using the probe's trimmer capacitor.
The 1X probes are suitable for many low frequency applications. They typically offer the same input impedance of the oscilloscope which is normally 1 M Ohm. The most common type of probe with a built in attenuator gives an attenuation of ten, and it is known as a 10X oscilloscope probe
Types of probes
Passive probes are the most commonly used probes for taking measurements. They are easy to use, relatively inexpensive, and fairly rugged. Available in the following configurations:
• 1´: no attenuation
• 10´: factor-of-10 attenuation
• 100´: factor-of-100 attenuation
• 1000´: factor-of-1000 attenuation
Attenuation probes serve to multiply the voltage measurement range of the oscilloscope by using an internal resistor that, when used in conjunction with the input resistance of the scope, creates a voltage divider. Useful for the following reasons:
• It allows for the measurement of a signal that might exceed the limits of the oscilloscope.
• The attenuation circuitry results in higher resistance and lower capacitance, which is important for high-frequency measurements.
Active probes contain active components, such as FETs or amplifiers. Commonly used for taking high-speed measurements (>500 MHz) or on high-impedance circuits. One limitation is their limited voltage range.
Differential probes are popular for measuring high-frequency signals or signals of very low amplitude.
A current probe measures the electrical current flowing through a conductor.
Tips
• Always use an appropriate probe tip and/or probe tip adapter whenever possible
• Keep ground leads short

...
顯示內容 隱藏內容

篩選條件

正在檢視 1 - 20,共 27 項產品
Results per page
Description Price Probe Type Attenuation Bandwidth Maximum Common Mode Input Voltage Connector Type Model Number p Number of Probes Safety Category Level Safety Category Voltage Series Safety Category Rise Time
全新
RS庫存編號 179-9558
BrandRS PRO
HK$488.37
單位
Passive 10:1 350MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <1ns
全新
RS庫存編號 179-9559
BrandRS PRO
HK$349.10
單位
Passive 10:1 150MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <2.33ns
RS庫存編號 146-6626
BrandRS PRO
HK$82.32
單位
PC Oscilloscope Probe Kit - - - BNC - - - - - - -
RS庫存編號 179-9565
BrandRS PRO
HK$4,595.88
單位
Active 1:10, 1:100 25 700V BNC - - CAT III - - - 14ns
RS庫存編號 146-6618
BrandRS PRO
HK$512.13
單位
Passive 1:10 300MHz 1.5kV BNC - 1 CAT I, CAT II 300 V, 600 V - CAT I 600 V, CAT II 300 V 1.2ns
RS庫存編號 146-6619
BrandRS PRO
HK$1,477.01
單位
Miniature 1:10 500MHz 500V BNC - 1 CAT I, CAT II 400 Vrms, 500 Vrms - CAT I 500 Vrms, CAT II 400 Vrms <0.7ns
全新
RS庫存編號 179-9562
BrandRS PRO
HK$285.04
單位
Passive 10:1 100 - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <3.5ns
RS庫存編號 146-6621
BrandRS PRO
HK$7,393.15
單位
Active 1:10 1.2GHz 40V BNC - 1 - - - - 291ps
全新
RS庫存編號 179-9560
BrandRS PRO
HK$327.75
單位
Passive 10:1 100MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <3.5ns
全新
RS庫存編號 179-9556
BrandRS PRO
HK$480.94
單位
Passive 1:1 and 10:1 Switchable 350MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <35ns
RS庫存編號 179-9566
BrandRS PRO
HK$13,653.27
單位
Differential 1:100, 1:1000 70MHz 5kV BNC - 1 CAT I - - CAT I 5000 Vrms 5ns
RS庫存編號 146-6612
BrandRS PRO
HK$181.89
單位
Passive 1:10 25MHz 400V BNC - 1 CAT I 400V - CAT I 400 V 14ns
RS庫存編號 146-6617
BrandRS PRO
HK$462.76
單位
Passive 1:1, 1:10 20 MHz, 250 MHz 600V BNC - 2 CAT I 600V - CAT I 600 V 1.4 ns, 18 ns
全新
RS庫存編號 179-9563
BrandRS PRO
HK$463.30
單位
Passive 10:1 200 - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <1.75ns
RS庫存編號 146-6615
BrandRS PRO
HK$392.76
單位
Passive 1:1, 1:10 15 MHz, 150 MHz 600V BNC - 2 CAT I 600V - CAT I 600 V 2.3 ns, 24 ns
RS庫存編號 123-6478
BrandRS PRO
HK$3,923.10
單位
Differential, High Voltage 1:10, 1:100 50MHz 1.5kV - - 1 - - - - -
RS庫存編號 146-6613
BrandRS PRO
HK$206.18
單位
Passive 1:10 150MHz 20V BNC - 1 CAT I 600V - CAT I 600 V 2.3ns
全新
RS庫存編號 179-9557
BrandRS PRO
HK$1,504.11
單位
Passive 10:1 500MHz - BNC - 1 CAT II 400 Vrms RS-TP CAT II 400Vrms <1ns
RS庫存編號 146-6624
BrandRS PRO
HK$30.05
單位
Passive - - - - - - - - - - -
RS庫存編號 123-6479
BrandRS PRO
HK$7,309.80
單位
Differential, High Voltage 1:50, 1:500 70MHz 1.5kV - - 1 - - - - -