- RS庫存編號:
- 190-1943
- 製造商:
- RS PRO
當前暫無庫存,可於2024/8/15發貨,3 工作日送達。
單價 个
HK$969.08
單位 | 每單位 |
---|---|
1 - 4 | HK$969.08 |
5 + | HK$797.55 |
- RS庫存編號:
- 190-1943
- 製造商:
- RS PRO
- COO (Country of Origin):
- ES
RS PRO 2.85 mm Natural PVA 3D Printer Filament, 1 kg
Need to design complex structures with your 3D printer? Turn to this polyvinyl alcohol (PVA) based filament from RS PRO. Its excellent printability with low moisture absorption makes it easy to get high-quality prints when you use it with Fused Filament Fabrication (FFF) technology machines.
The filament is resistant to oil as well as grease and solvents, so you can use it for manufacturing industrial equipment and parts. You can print with this material even if your printer is not equipped with a heated bed, as PVA does not shrink or warp much. Using a heated bed between +35˚C and +60˚C, however, can help minimise these effects further.
Since this component is cold-water-soluble, it's frequently used to create prototype moulds that you can quickly remove without ruining the casting. The filament is best used in printers with dual extruders if you want to create intricate shapes.
The filament is resistant to oil as well as grease and solvents, so you can use it for manufacturing industrial equipment and parts. You can print with this material even if your printer is not equipped with a heated bed, as PVA does not shrink or warp much. Using a heated bed between +35˚C and +60˚C, however, can help minimise these effects further.
Since this component is cold-water-soluble, it's frequently used to create prototype moulds that you can quickly remove without ruining the casting. The filament is best used in printers with dual extruders if you want to create intricate shapes.
Features and Benefits
• Natural colour
• Diameter of 2.85 mm
• For use with common desktop 3D printers
• Support materials material type
• PVA printing material
• Fused Filament Fabrication (FFF) printing technology
• Weight of 1 kg
• Diameter of 2.85 mm
• For use with common desktop 3D printers
• Support materials material type
• PVA printing material
• Fused Filament Fabrication (FFF) printing technology
• Weight of 1 kg
Attribute | Value |
---|---|
Material Type | Support |
Printing Technology | FDM |
Machine Specific | No |
Colour | Natural |
For Use With | Dual Extrusion |
Weight | 1kg |
Diameter | 2.85mm |
Printing Material | PVA |