RS PRO Analogue Panel Ammeter 20 (Input)mA DC, 92mm x 92mm, 1 % Moving Coil
- RS庫存編號:
- 186-2501
- 製造商:
- RS PRO
15 現貨庫存，可於3工作日發貨。
單價 个
HK$206.60
單位 | 每單位 |
|---|---|
| 1 - 4 | HK$206.60 |
| 5 - 24 | HK$198.30 |
| 25 + | HK$163.20 |
- RS庫存編號:
- 186-2501
- 製造商:
- RS PRO
不適用
- COO (Country of Origin):
- IN
RS PRO DC Analogue Panel Ammeter
The RS PRO 92mm x 92mm cut-out DC analogue panel ammeter has a measurement range from 0mA to 20mA input. The DIN style panel meter comprises permanent magnet moving coil movement and indicates an average value. The movement consists of a magnet, an aluminium coil suspended on pivots, a hairspring and a jewel mechanism. The scales are linear and calibrated down to zero. High currents are measured with separate shunts attached to the rear side of the meter. The meter is housed in a moulded polycarbonate case.
Features and Benefits
• Operating temperature ranges between -10°C and 65°C
• Accuracy: 1%
• Pointer: Knife-edge type
• Pointer deflection: From 0° to 90°
• Nominal range of use: From 15μA to 100A
• Shock resistance: 15g for pulse duration 11 milliseconds
• Moulded square case suitable for mounting control/switchgear panels in machinery consoles
• Overload: 1.2 times nominal current (continuous)
• Relative humidity: Less than 75% annual average (noncondensing)
• Accuracy: 1%
• Pointer: Knife-edge type
• Pointer deflection: From 0° to 90°
• Nominal range of use: From 15μA to 100A
• Shock resistance: 15g for pulse duration 11 milliseconds
• Moulded square case suitable for mounting control/switchgear panels in machinery consoles
• Overload: 1.2 times nominal current (continuous)
• Relative humidity: Less than 75% annual average (noncondensing)
Certifications
• UL 94 V-0 approved
• 2014/30/EC (EMC directive)
• 2014/35/EC (low voltage directive)
• CE certified
• IP52 rated
• EN 61010
• VDE 0100-410: 2018-10 approved
• IEC 529
• IEC 61010
• ISO 20653: 2006-08
• 2014/30/EC (EMC directive)
• 2014/35/EC (low voltage directive)
• CE certified
• IP52 rated
• EN 61010
• VDE 0100-410: 2018-10 approved
• IEC 529
• IEC 61010
• ISO 20653: 2006-08
Attribute | Value |
|---|---|
| Maximum Value | 20 (Input)mA |
| Current Type | DC |
| Moving Element | Moving Coil |
| Cutout Height | 92mm |
| Cutout Width | 92mm |
| Depth | 54 (<4 A)mm |
| Meter Accuracy | 1 % |
| Minimum Temperature | -10°C |
| Maximum Temperature | +65°C |
| Measurement Range | 0 → 20 (Input)mA |
| Minimum Displayed Value | 0 (Input)mA |