Electrolube transparent 200 ml Aerosol Conformal Coating for PCBs, -70 → +200 °C

  • RS庫存編號 101-6343
  • 製造零件編號 DCA200H
  • 製造商 Electrolube
產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): GB
產品詳細資訊

Silicone Conformal Coating

A flexible, transparent modified silicone resin conformal coating. For use in the protection of electronic circuitry to meet aerospace and defence standards.

Resistant to most solvents, lubricants and cooling fluids
Excellent resistance to mould growth and UV light and to prolonged exposure to tropical life and salt spray
High gloss finish and high surface resistivity
Fluorescent under UV light for inspection
Coverage 8000 cm² @ 25 micron thickness
Approved to DEF STAN 59//47 issue 4

Electrolube Conformal Coating

The Allen Bradley Guardmaster 0110N safety edge protection profile has a 1.5m protection area with an LHT wire lead terminal. The Safedge pressure-sensitive system is supplied in 2 popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor acts as the amount of distance the profile can be depressed after a signal has been generated. It is mounted on an aluminium C rail and is supplied in 1, 1.5, and 2m lengths. These lengths can be cut and joined in a series or parallel to support a wide range of industrial applications. The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together, enabling it to return to its original shape even after repeated compressions. It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strap ensures that there are no problems of resistance build upon long lengths.
Note:
These Safedge profiles are supplied part assembled. The series terminating resistor and the associated end-closing cap is not attached to the profile but then are supplied separately in a bag. This allows cutting the profile to an appropriate length before completing the assembly by inserting the resistor and glueing the end cap in place. This is done using an industrial cyanoacrylate adhesive.

Features and Benefits

• Suitable for use at temperature extremes and very wide operating temperature range
• Can be reworked using specialist removal product, Electrolube CCRG
• Resistant to most solvents, lubricants, and cooling fluids
• Excellent resistance to mould growth and UV light and to prolonged exposure to tropical life and salt spray
• High gloss finish and high surface resistivity
• Fluorescent under UV light for inspection
• Coverage of 8000cm² at 25 micron thickness
• Approved to issue 4
• Operating temperature ranging between -70⁰C and 200⁰C

Applications

• Electronic circuitry
• PCBs

Certifications

• DEF STAN 59//47
• UL approved

Approvals

UL, DEF STAN

Warning

  • Flammable propellant.
規格
Attribute Value
Package Size 200 ml
Package Type Aerosol
Application PCBs
Material Silicone Resin
Colour Transparent
Maximum Operating Temperature +200°C
Minimum Operating Temperature -70°C
Trade Name DCA
現貨庫存, 可於8 工作天免費送貨
單價 個
HK$ 156.54
(不含稅)
單位
Per unit
1 - 4
HK$156.54
5 - 9
HK$153.26
10 +
HK$150.98