Recom REC3 DC-DC Converter, ±15V dc/ ±100mA Output, 4.25 → 5.75 V dc Input, 3W, Through Hole, +80°C Max Temp
- RS庫存編號:
- 672-7228
- 製造零件編號:
- REC3-0515DR/H1
- 製造商:
- Recom
3 現貨庫存,可於3工作日發貨。
單價 个
HK$159.80
單位 | 每單位 |
---|---|
1 - 3 | HK$159.80 |
4 - 7 | HK$155.90 |
8 + | HK$153.40 |
- RS庫存編號:
- 672-7228
- 製造零件編號:
- REC3-0515DR/H1
- 製造商:
- Recom
- COO (Country of Origin):
- TW
Recom 3W DIP Single/Dual Output Regulated Isolated DC-DC Converter - REC3-H1 Series
Regulated output
1kVdc isolation
Continuous short circuit protection
Efficiency at full load to 65%
DIP24 package
1kVdc isolation
Continuous short circuit protection
Efficiency at full load to 65%
DIP24 package
Note
MTBF to MIL-HDBK 217F.
Operating temperature is without derating.
Operating temperature is without derating.
Standards
EN-60950-1, UL-60950-1
Approvals
UL recognised
![](https://media.rs-online.com/t_line/L6727215-01.jpg)
RECOM DC-DC Converter, 500V AC Isolation Voltage, 2 Outputs - REC3-H1 Series - REC3-0515DR/H1
Energise your applications with this DC-DC converter from RECOM. It's a PCB-mounting device that changes incoming direct currents to the correct values needed by your equipment. The versatile component delivers isolated outputs or generates dual rails from a single supply. Thanks to the built-in regulator, you can bank on load-independent consistent voltages for glitch-free performance. Momentary power bursts of 140% support large capacitive loads or high start-up demands. By maintaining a barrier between DC inputs and outputs, it keeps a firm hold on safety too.
• Through-hole mounting for convenient PCB installation
• Hardwearing PDIP package insulates live components for better electrical safety
• Continuous short-circuit protection guards against faults for improved durability and reduced downtimes
• Wide operating temperature range between -40°C and +80°C for use in harsh conditions
• Hardwearing PDIP package insulates live components for better electrical safety
• Continuous short-circuit protection guards against faults for improved durability and reduced downtimes
• Wide operating temperature range between -40°C and +80°C for use in harsh conditions
Applications
• Server rooms
• Consumer electronics
• Smart lighting installations
• Industrial packaging and assembly lines
• Medical equipment
• Consumer electronics
• Smart lighting installations
• Industrial packaging and assembly lines
• Medical equipment
What are the benefits of through-hole mounting on a PCB?
Through-hole mounting lets you simply align your DC-DC converter with the designated holes on your PCB and then push the pins through the holes. When soldered, this creates a strong bond with the board to support high-voltage components under mechanical stress.
Attribute | Value |
---|---|
Output Voltage | ±15V dc |
Input Voltage Range | 4.25 → 5.75 V dc |
Power Rating | 3W |
Input Voltage Nominal | 5 V dc |
Output Current | ±100mA |
Mounting Type | Through Hole |
Isolated | Yes |
Number of Outputs | 2 |
Package | DIP 24 |
Isolation Voltage | 500V ac |
Width | 20.3mm |
Depth | 10.2mm |
Length | 32mm |
Series | REC3 |
Load Regulation | ±1% |
Maximum Temperature | +80°C |
Efficiency | 75% |
Minimum Temperature | -40°C |
Standards Met | EN60950 |