Recom RM DC-DC Converter, 12V dc/ 21mA Output, 10.8 → 13.2 V dc Input, 0.25W, Through Hole, +85°C Max Temp -40°C

Unregulated outputs
1kVdc isolation
Efficiency at full load up to 72%
Short circuit protection
Fully encapsulated
UL94V-0 package material
Industry standard SIP4 pinout

MTBF to MIL-HDBK 217F.
Operating temperature is without derating.

EN-60950-1

This DC-DC converter from RECOM is your new best friend when it comes to power management. It takes an input voltage between 10.8 and 13.2V DC and adjusts it to a safe 12V DC output to drive connected devices. Built-in short circuit protection is on hand to protect this unit from hazards like current surges. It has a broad operating temperature range between -40°C and +85°C so you can rest assured it can handle the heat in harsh conditions. Fitting this unit onto a busy board is a cinch, as its compact dimensions of 11.5 (L) x 10mm (D) mean it takes up little space.

• Low output ripple and noise of 50mVp-p max for reduced electrical disturbance
• Output voltage accuracy of ±5% for reliable power conversions
• Mean time between failures of 1,327,000 hours for lasting operation
• Efficiency rating between 70% and 72% to reduce energy waste

• Computer peripherals
• Gaming devices
• Agricultural equipment
• Aviation engineering

You can mount the unit in a flash by inserting its built-in pins into pre-drilled holes on your PCB.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.