Electromen OY, DC Motor Controller, Potentiometer Control, 12 → 32 V dc, 8 A

產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): FI
產品詳細資訊

PWM DC 8A 12-32Vdc

EM-174 motor drive is designed for DC-motor speed control. The unit regulates motor voltage so a non regulated supply voltage is suitable. Potentiometer or direct voltage signal can be used to give the speed control value. Rotation direction changes when control input value turns negative or if control input signal is applied to direction input.The unit has reference positive and negative signal for potentiometer use, i.e. the potentiometer can also be used to drive in both directions, the motor stops at potentiometer middle position. Set value range can be scaled to range trim.,During a direction change, the controller waits for motor to stop before driving in opposite direction. This avoids current peaks at direction change. The current limit can be set with a pot or direct voltage signal to protect the motor and mechanics in jam situations. Start up speed can be limited an acceleration ramp, which slowly rises the motor voltage in a desired way. Ramp time is set with a pot.EM-174 can be optimised for 12 or 24 V supply use.

Bi-directional
No brake
Controlled direction change +/-10v or 0-10v
Soft start ramp
Adjustable current limit
Load compensation (IR comp)

規格
Attribute Value
Supply Voltage 12 → 32 V dc
Current Rating 8 A
Voltage Rating 40 V
Control Input Potentiometer
Length 65mm
Width 73mm
Depth 30mm
Dimensions 65 x 73 x 30 mm
Operating Temperature Range -20 → +70 °C
17 現貨庫存,可於3工作日發貨。
單價 個
HK$ 1,249.95
(不含稅)
單位
Per unit
1 +
HK$1,249.95