The PULS DIN rail panel mount power supply has an input voltage range from 100VAC to 240VAC. The output current is 10A and the maximum input current is 2.15A. The type of mode is switch mode power supply. The switch mode CP series is a DIN rail mounting type power supply. It has high immunity to power surges as well as low electromagnetic emission. High immunity makes it suitable for almost every situation.
Features and Benefits
• 20% output power reserves • Active power factor correction • Efficiency up to 95.2% • Excellent partial load efficiency • Minimal inrush surge current • Overload protection • Practical handling • Short circuit protection
Applications
• ITE commercials
Certifications
• ATEX • CE certified • CULus listed • IEC • IECEx • UL approved
Attribute
Value
Series
CP
Electrical Phase
1
Number of Outputs
1
AC or DC Input Voltage
ac
Input Voltage
100 → 240V ac
AC or DC Output Voltage
dc
Output Voltage
24V dc
Output Current
10A
Power Rating
240W
Dimensions
39 x 117 x 124mm
Depth
117mm
Height
124mm
Width
39mm
Standards Met
ANSI/ISA 12.12.01-2015, ATEX EN 60079-0, ATEX EN 60079-15, CE Certified, cRUus UL 60950-1, CSAus Certified, cULus Listed, GL Listed, IECEE IEC 60950-1, IECEx IEC 60079-0, IECEx IEC 60079-15, UL 508
Hazardous Area Certification
ATEX, IECEx
Mounting Type
DIN Rail Mount
Maximum Temperature
+70°C
Load Regulation
50mV
Output Voltage Adjustment Range
24 → 28V
MTBF
100h
Ripple And Noise
50mV Pk-Pk
Efficiency
95.2%
Minimum Temperature
-25°C
Special Features
Easy Fuse Breaking due to High Overload Peak Current
