The PULS DIN rail power supply can deliver four times the nominal output current for at least 15ms which helps to trip fuses on faulty output branches. It has an input voltage range from 100VAC to 240VAC. The output current is 20A and the maximum input current is 4.26A. It has high immunity to power surges as well as low electromagnetic emission. High immunity makes it suitable for almost every situation.
Features and Benefits
• 20% output power reserves • Active power factor correction • Adjustable output • Current sharing feature for parallel use • Efficiency up to 94% • Excellent partial load efficiency • Minimal inrush surge current • Practical handling
Applications
• ITE commercials
Certifications
• ATEX • CE certified • CULus listed • IEC • IECEx • UL approved
Attribute
Value
Series
C
Electrical Phase
1
Number of Outputs
1
AC or DC Input Voltage
ac
Input Voltage
100 → 240V ac
AC or DC Output Voltage
dc
Output Voltage
24V dc
Output Current
20A
Power Rating
480W
Dimensions
65 x 127 x 124mm
Depth
127mm
Width
65mm
Height
124mm
Minimum Temperature
-25°C
MTBF
100h
Output Voltage Adjustment Range
24 → 28V
Load Regulation
100mV
Special Features
Active Power Factor Correction (PFC)
Efficiency
94%
Mounting Type
DIN Rail Mount
Ripple And Noise
50mV Pk-Pk
Hazardous Area Certification
ATEX, IECEx
Standards Met
ATEX EN 60079-0, ATEX EN 60079-15, CE Certified, cRUus UL 60950-1, CSAus ANSI/ISA 12.12.01-2007, cULus Listed, GL Certified, IECEE IEC 60950-1, IECEx IEC 60079-0, IECEx IEC 60079-15, UL 508
