Phoenix Contact QUINT POWER Switched Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 24V dc dc Output, 20A

QUINT POWER generation maximizes the availability of your plant. With some featuring the SFB technology (Selective Fusebreaking Technology), the 6-times nominal current for 12 ms, can be the first time standard circuit breakers reliable and quick trigger. Faulty current paths are selectively shut down, the error is limited and important Plant parts remain in operation.

Selective Fusebreaking Technology (CRC Technology)
Worldwide use through wide-range input for DC and AC networks
Reliable start difficult loads with static power reserve POWER BOOST
High reliability through high MTBF> 500,000 h, long power failure bridging times > 20 ms, high voltage to 300 Vac
Preventive function monitoring DC-OK by professional signaling
Slim design
Conformal coating for extreme environments (Some models)

The QUINTPOWER power supply unit's feature terminal blocks on both the top & bottom of the unit. You'll need to strip 7mm length from your cable and insert it into the terminal blocks. A simple screw connection (M4 screw) will then lock your cable into the terminal block, providing an output or input connection. However, please follow all manafactuer installation instructions.

Typically these power supplies are mounted into cabinets and are used in industrial circumstances. They can be used for automation, machinery or any project that has modules that are mounted on DIN-rails.

665-7766, 665-7769, 665-7794 and 665-7790 do not feature SFB technology

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved, CSA, CB, ABS

Deliver safe and seamless energy to your DIN rail-connected components with this power supply unit from Phoenix Contact. It's an electrical device that takes AC input from the mains supply and converts it into 24V DC voltage that your circuit breakers, relays and other components can use. Thanks to a static power boost feature, it can generate up to 1.5 times the nominal current to start difficult loads. Its preventive monitoring system detects critical operating states before faults occur, preventing damage to the circuit and improving performance.
This device weighs just 1.7kg, so it's easy to handle and won't strain your DIN rail. Its IP20 (ingress protection) rating means it's touch-proof and resistant to tools and objects larger than 12mm, making it well-suited to harsh environments. For electrical safety, the power supply unit has a 10A input fuse that offers quick short-circuit protection. Components like this one are commonly found in heavy-duty equipment control panels.

• Wide operating temperature range of -40°C to +70°C for use in demanding conditions
• Screw connection method is easy and quick to carry out
• Mean time before failures of up to 900,000 hours for dependable long-term performance