38 W Emergency Light Conversion Kit, 150 x 44 x 30 mm

  • RS庫存編號 466-3330
  • 製造商 RS PRO
產品概覽和技術數據資料表
法例與合規
不適用
COO (Country of Origin): GB
產品詳細資訊

Emergency Lighting Kits

Ideal for integrating into existing control gear. Supplied with a fused terminal block and pre-cut connection wires.,The modules can be tuned specifically to the lamp, giving better performance for the cell capacity.

Note

Nominal tube diameter - T5=16mm, T8=26mm, T12=38mm

38W Emergency Light Conversion Kit

Ideal for integrating into existing control gear. The modules can be tuned specifically to a wide range of 4 pin (T5) fluorescent lamps. , giving better performance for the cell capacity. It is fitted with 5 pole relays to switch all four lamp connections from ballast to inverter and switch off the power to the ballast during an emergency. Supplied with a fused terminal block, B12 pre-cut connection wires and a 5 cell battery pack (Type D batteries).

Conversion Kits

Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also available. The remote box is also suitable for converting double luminaires into emergency units, however only 1 tube will operate under emergency conditions. Two live supplies are required for standard operation, one switched, one unswitched. Failure of the unswitched supply operates the changeover circuit bringing on the battery supply. A red LED is supplied with the module for fitting into either the luminaire or remote box, to indicate a healthy battery charging state. The nickel-cadmium battery packs are protected against deep discharge.

規格
Attribute Value
Number of Lamps 1
Wattage 38 W
Fixing Centres 140mm
Length 150 mm
Height 30mm
Width 44 mm
當前暫無庫存,可於2020/4/6發貨,3 工作日送達。
單價 個
HK$ 936.36
(不含稅)
單位
Per unit
1 +
HK$936.36