Schneider Electric Harmony, Red, Key Reset 40mm Mushroom Head Emergency Button

Schneider Electric Empty Control Station - XAPJ1201SPEC0971

• Forms part of the Harmony XAP range of products
• Brought to you as a complete die-cast empty control station
• The plate size is 80 x 80 mm with a usable depth of 49 mm
• 1 cut-out
• Features a blue base colour and a yellow cover
• Flush device mounting
• The cable entry is 1 hole with blanking plug for cable gland, clamping capacity: 14 mm and 1 hole without blanking plug for cable gland, clamping capacity: 14 mm

What is the different between a push button switch for an emergency stop and a general-purpose push button switch?

The cable entry for XAPJ1201SPEC0971 is as follows: •1 hole with blanking plug for cable gland <= 14 mm
•1 hole without blanking plug for cable gland <= 14 mm

Frequently asked questions & answers

What is the different between a push button switch for an emergency stop and a general-purpose push button switch? A general-purpose push button switch is used for controls, e.g. to start machine operation or simply to switch modes. An emergency stop push button switch however, is mainly used as a safety measure to stop hazardous events.
How can I avoid pressing on the 22 diameter emergency stops when not necessary?
Option to be considered is to retrofit metal guards, which can be found under ZBZ160 category for 40 mm diameter emergency stops.
What is Trigger Action?
A standard operator can be teased enough to open a normally closed contact without latching into the depressed position. Trigger action units are spring loaded so they only depress the contact block after it latches into the depressed position.

What is trigger action?

A standard operator can be teased enough to open a normally closed contact without latching into the depressed position. Trigger action units are spring loaded, so they only depress the contact block after it latches into the depressed position.