Sensata/Cynergy 3 RSF50 Series Vertical Polyphenylene Sulfide Float Switch, Float, 1m Cable, NO/NC, 300V ac Max, 300V
- RS庫存編號:
- 725-9892
- 製造零件編號:
- RSF56H100R1/8
- 製造商:
- Sensata / Cynergy3
當前暫無庫存,可於2024/7/12發貨,3 工作日送達。
已增加
單價 个
HK$306.69
單位 | Per unit |
1 - 5 | HK$306.69 |
6 - 11 | HK$294.43 |
12 + | HK$282.15 |
- RS庫存編號:
- 725-9892
- 製造零件編號:
- RSF56H100R1/8
- 製造商:
- Sensata / Cynergy3
法例與合規
- COO (Country of Origin):
- GB
產品詳細資訊
Vertical Float Switches
The RSF50 series of compact vertical float switches have a single switching point, mounting is either from the top or bottom of the tank therefore access to the inside of the tank is required. These float switches are ideal for vending machine, printing systems, and chemical dosing applications.
Features & Benefits
Manufactured in a variety of materials with a choice of gasket materials to suit most commonly used liquids
Mounting in top or bottom of tank
N/O versions can be configured as N/C by float inversion
All units WRAS approved for use in hot and cold water
Mounting in top or bottom of tank
N/O versions can be configured as N/C by float inversion
All units WRAS approved for use in hot and cold water
Note
Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread
Part numbers ending in 'C' have an M12 mounting thread
Warning
The cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Supplied with
epoxy sealed leadouts
Sensata Cynergy3 Vertical Float Switch, NO/NC, 1m Cable - RSF50 Series - SF56H100R1/8
Choose this float switch from Sensata Cynergy3 for monitoring liquid levels in your tanks and other large vessels. It's designed for vertical mounting through a hole in the top or bottom of the inside of your tank. You can reverse the switch action by simply inverting it through 180°, making it a versatile component. It's suitable for applications such as vending machines, industrial printing systems and chemical dosing equipment.
Features & Benefits
• Wide operating temperature range of -10°C to +105°C for use in demanding environments
• Made of polyphenylene sulfide (PPS) material for chemical and abrasion resistance
• High maximum voltage rating of 300V for use in high-power applications
• Ample cable length of 1m for a flexible connection
• 1/8-inch NPT (National Pipe Thread) connection for a secure and simple attachment
• Made of polyphenylene sulfide (PPS) material for chemical and abrasion resistance
• High maximum voltage rating of 300V for use in high-power applications
• Ample cable length of 1m for a flexible connection
• 1/8-inch NPT (National Pipe Thread) connection for a secure and simple attachment
How does this switch work?
This switch's actuator has an in-built magnet that causes changes in the magnetic field as it moves up and down with the water level. The contacts open and close when the switch's sensor responds to the change in magnetism.