McLennan Servo Supplies Spur Gearbox, 100:1 Gear Ratio, 4 Nm Maximum Torque
- RS庫存編號:
- 718-896
- 製造零件編號:
- MRIG22 (100:1)
- 製造商:
- McLennan Servo Supplies
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 件）*
HK$1,777.20
訂單超過 HK$250.00 免費送貨
有庫存
- 1 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | HK$1,777.20 |
* 參考價格
- RS庫存編號:
- 718-896
- 製造零件編號:
- MRIG22 (100:1)
- 製造商:
- McLennan Servo Supplies
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | McLennan Servo Supplies | |
| Gear Ratio | 100:1 | |
| Gearbox Type | Spur | |
| Maximum Output Torque | 4 Nm | |
| Overall Width | 56mm | |
| Overall Depth | 41mm | |
| 選取全部 | ||
|---|---|---|
品牌 McLennan Servo Supplies | ||
Gear Ratio 100:1 | ||
Gearbox Type Spur | ||
Maximum Output Torque 4 Nm | ||
Overall Width 56mm | ||
Overall Depth 41mm | ||
- COO (Country of Origin):
- CH
Adaptable Gearboxes 4Nm
A range of high quality steel geared gearboxes with the following features:
Maximum output 4Nm
Metal throughout for high reliability and performance and dissipation of heat
Sintered bronze bearings
Maximum radial load on output shaft 25N
Maximum axial load on output shaft 20N
Maximum continuous output power 15 watts
Output shaft sealed to eliminate grease escaping from the gearbox
Comprehensive instruction sheet supplied giving fitting instructions
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters
相关链接
- McLennan Servo Supplies Spur Gearbox 0.5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox 1.5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox 5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox 4 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox 0.3 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox 4 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox 6 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox 7 Nm Maximum Torque